Full text of "The science and geometry of dress"

See other formats

copv

THE

Science and Geometry of Dress.

BEING A COMPLETE MANUAL OF INSTRUCTION IN THE

ART OF DESIGNING, DRAFTING AND CUTTING

its'l 4lnl(lrm's|lmrin0 Ipard

AN ENTIRE! y

NEW AND ORIGINAL METHOD

OF TEi^CHING-

BY DIAGRAMIC DELINEATIONS OF GARMENTS IN MINIATURE, TOGETHER WITH EXPLICIT
DIRECTIONS FOR MAKING AND TRIMMING; TO WHICH IS ADDED A

Vocabulary of Fashion,

CONSISTING OF WORDS AND PHRASES PECULIAR TO DRESS, MATERIALS, DESCRIPTIONS

OF STYLES, ETC., ETC.

By MRS. L. L. JACKSON,

Author of tJie ''FAMILY DRESS GUIDE,'' Etc.

SPECIALLY DESIGNED AND ARRANGED FOR SCHOOLS, PRIVATE TUITION, D&BS3-
MAKERS, AND LADIES GENERALLY.

INDIANAPOLIS. IND.

Entered according to act of Congress, in the year 1876, by
MRS. L0UI8A L. JACKSON,

In the Office of the Librarian of Congress, at Washington.
RIGHT OF TRANSLATION RESERVED.

GEN. T. A. MORRIS,

INDIANAPOLIS, INDIANA,
IN KIND REMEMBRANCE,

IS RESPECTFULLY INSCRIBED,
THE AUTHOR.

PREFACE.

This work, in its general design, is intended by the author as a complete Guide,
Instructor and Text-Book on measuring, designing, drafting and cutting ladies' and
children's clothing — suited not only to the studies of the school-room and the re-
quirements of the professional Artist in Dress, but also to that large class of ladies
outside the profession whose industry is chiefly confined to the home-circle.

In the plan herein adopted will be found all the essential rules and directions
contained in our former instruction book, first published in 1867, entitled the
"Family Dress Guide," besides many important additions suited to the advanced
stage of the Art, and specially applicable to garments of modern style and con-
struction.

The chief object of the " miniature method " of drafting, designed to be used
and applied in connection with the elementary rules of this work, is to facilitate
the teaching of this science in schools and classes, as also to reduce the labor and
time required in imparting instructions.

The diagram illustrations herein given are intended to impress the mind of the
pupil in advance with the general plan and outline of the garment to be drafted,
this rendering subsequent labor easy and intelligible.

In conclusion, as a matter of special importance to the rapid advancement of the
pupil, the author would urge a strict adherence, while under instructions, to the use
of the Miniature Drass Guide and the average measures aa printed on the diagrams.

Indianapolis, Indiana, October, 1876. L. L. J.

[31

CONTENTS.

PART FIRST— liESSON 1.

Elementarv Rules and Definitions 13

Diagram 1. The Greneral Shape and Outline of the Front of Dress-Waist,
with the Names and Locations of the several Points, Curves
and Lines forming the basis of the Measurments used in

drafting

" 2. How to Draft the Front of Dress-Waist — Open at the Center.... 14
" 2. Position of the Dress-Goods and the Dress-Guide when com-
mencing to Draft the Front- Waist 14

" 4. How to Shape the Front Arm-Curve 17

" 4. How to Draft the Length of Waist — under the Arm 17

" 4. Position of the Front-Guide when drafting the bottom of Waist-
Line 18

" 4, How to Measure up the Center of Front to find the Height of

the Neck 18

** 3, The proper position of the Fr5nt-Guide on the Goods when dot-
ting at the Neck-Measure

" 3. How to Draft the Curve of the Front-Neck 18

" 5. How to Draft the Front-Shoulder 18

" 5. How to Ke-shape the upper part of Arm-curve for Short-Shoulder 19

" 5. How to determine the top of the Darts 19

" 5. How to form the Center Line of Darts 19

" 6. The Front of Dress-Waist in its finished condition, showing al-
lowance for Seams, etc

JLESSON 3.

Diagram 7. The general shape and outline of the Back of Dress-Waist,
with the Names and Locations of the several Points,
Curves and Lines forming the basis of the Measurements

used in Drafting

" 7. How to Draft the Back of Dress-Waist— Closed at the Center... 23
** 8. The position of the Dress-Goods and the Dress-Guide when com-
mencing to Draft the Back- Waist

[4]

Diagram 8. How to Shape the Back Arm-Curve 23

" 8. How to Draft the Length-of-Waist Line 23

" 8, How to Draft the Bottom of "Waist 23

" 8. How to Measure up the Center of Back to find the height of the

Neck 26

" 9. The proper position of the Back-Guide on the Goods when dot-
ting at the Neck-Measure

" 10. How to Draft the Line of the Back-Neck 26

" 11. How to Draft the Back-Shoulder 26

" 11. How to Re-shape the Back Arm-Curve for Short-Shoulder 26

" 11. How to Shape the Side-Form of the Back 28

" 11. This represents the Back of Dress-Waist in its finished con-
dition, with Seams added, etc

liESSOlV 3.

Diagram 12. Lady's Coat-Sleeve 28

" 12. How to Measure the Arm for Sleeve 28

" 12. How to Shape the Outline of Sleeve 29

liESSON 4.

Diagram 15.

15.

((

16.

17.

18.

Diagram 19.

((

20.

((

21.

((

22.

Diagram 23.

23.

({

23.

24.

Diagram

25.

((

25.

Dress-Waist — Closed at the Front 31

Position of the Dress-Guide on the Goods when Drafting Waist

Closed at Front , 31

Dress-Waist — Open at the Back 31

Loose-Waist — How to Draft the Front 33

Loose-Waist — How to Draft the Back 33

liESSON 6.

Waist, with Yoke at Front 34

Waist, with Yoke at Back 36

Waist, with Pointed Yoke at the Front 36

Waist, with Yoke at the Center of Back 38

PART SECOND- I>E8S09« 6.

Front of Sacque-Wrapper — Loose-Ftting 40

How to find the Slope or Angle of the Side-Gore 40

Length of Skirt at the Side 40

Length of Skirt at the Center of Back 42

How to Shape the Bottom of the Skirt 42

Back of Sacque-Wrapper — Loose-Fitting 42

L.ESSON v.

Front of Lady's Basque 44

How to Draft the Front 44

How to find the Slope of the Side-Gore 44

How to Curve the Skirt at the Bottom ■ 46

How to Shape the Curve below the Waist-Line 46

How to Lengthen and extend the Darts below the Waist-Line.. 47

[5]

Diagram 26. Back of Basque, without Plait 47

" 26. How to Shorten the "Waist at the Center of Back 47

" 26. How to Draft the Skirt at Back 49

" 27. How to Separate the Side-Form and Draft the Skirt at the Side 49

I.ESSON S.

Diagram 28-29. Back of Basque, with Box-Plait at the Side-Form 51

" 30. Back of Basque, with Box-Plait at the Side-Form, without
Seam ; also, with Curve extending from the Neck down
the Center of Back 53

liESSON 9.

Diagram 31. Lady'a Basque, with Vest-Front, and Side-Form commencing

at the Shoulder 55

" 31. How to Shape the Vest-Front 55

" 32. Back of Basque, with Box-Plait at the Side-Form and at the

Center of Back 57

Ii£SSON 10.

Diagram 33. Front of Lady's Half-Fitting Sacque 59

" 34-35. Back of Half-Fitting Sacque, without Plaits 59

i.ESSOi«r 11.

Diagram 36. Lady's Polonaise — Open at the Front..; 62

" 37. Back of Lady's Polonaise, with two Box-Plaits in the Skirt;
one at the Center of the Back, and the other at the terminus

of the Side-Form, without Seam 62

" 38. Miss' Basque— Closed at the Front 65

" 39. Miss' Basque— Open at the Back 65

liESSON 12.

Diagram 40-41. Bodice-Waist— Front and Back 67

" 42-43. Miss' Polonaise, with Side-Form— Closed at the Front 69

" 44-45. Miss' Polonaise — Open at the Back 71

liESSON 13.

Diagram 46. Front of Double-Breasted Sacque-Cloak — Loose-Fitting 73

" 47. Back of Sacque-Cloak — Loose-Fitting 75

" 48. Lady's Circular 77

" 49. Hood for Lady's Circular , 79

I.ESSON 14.

Diagram 50. Front of Pnncess Dress, with Kevere Collar SO

" 50. Back of Princess Dress - 81

" 51-52-53. Gents' Sacque Yoke-Shirt.. 82

" 54^55-56. Lady's Dress-Skirt, without Train 85

[6]

DlAGBAM 57-58-59-60. Lady's Dress-Skirt, with Train. „ 87

61-62-63. Lady's Over-Skirt 87

JLESSON 15.

Diagram 64, Lady's Sacque Chemise 90

" 65-66. Lady's Yoke Chemise 90

" 67-68. Lady's Corset-Cover 93

" 69. Lady's Drawers 93

liESSOHr 16.

Diagram 70-71. Gent's Dresshig-Gown 95

" 72-73. Boy's Coat 98

" 74. Boy's Coat-Sleeve 100

" 75-76. Gents' Tight Pants 101

" 77-78. Boy's Loose Pants 103

PART THIRD.

Practical Directions on Cutting, Fitting, Basting, etc 104

The Quantity of Material Required for a Suit, and How to Cut it 104

How to Draft the Lining for the Front of Basque 105

How to Draft the Lining for the Back of Basque 106

How to Cut the Outside for the Front of Basque 106

How to Cut the Lining for the Back 107

How to Cut the Lining for the Skirt - 107

How to Cut the Outside for the Skirt 108

How to Arrange the Lining upon the Goods to Economize in Cutting the Out-
side for the Front and Side- Widths 108

How to Cut the Overskirt 109

How to Estimate the Amount of Material required for Trimming the Skirt... 109

How to Calculate the Amount of Plaiting required for the Overskirt 110

How to Calculate the Amount of Plaiting required for Basque and Sleeves Ill

How to Cut the Biasses for Bands and Cords Ill

A Sure Eule to Prevent Mistakes in Cutting when a Difference in the Figure

or in the Sides of the Material Exists 113

Cutting Goods on the Bias 113

Dress-Linings ^. 114

How to Baste a Basque 114

Defects in Cutting, and their Eemedies 116

Sleeves and Sleeve-Linings 119

Princess Dress... 120

Double-Breasted Polonaise 120

Lady's Polonaise — Open at the Back 121

Lady's Polonaise, with Basque-Back 121

Polonaise, with Basque-Front 121

Water-Proof Cloaks : 122

How to Determine the Size of Darts for Irregular Forms 122

How to Enlarge from Designs in the Fashion-Books 122

[7]

EXPLANATION OF TERMS, USED IN DRAFTING.

The " Dress-Guide." — By this title is implied a complete set of
Diagrams, so constructed and arranged in shape, measurements and
proportion as to correspond with, and represent in life-size, the com-
ponent parts of a Lady's Dress-Waist — consisting of the following
separate and distinct pieces; viz.:

The " Front Guide." — This is used in drafting the front of
Dress-Waist.

The " Back Guide." — This is used in drafting the back of Dress-
Waist.

The "Dart-Rule." — By this the darts are shaped; also, the
curve below the Waist in front, applied in drafting Basques, etc.

The " SiDE-FORM-RuLE " — Is that portion ot the Guide by which
the side-form of the Waist is drafted. It is also used in shaping
the outline and curves of the sleeve, etc.

The " Skirt-Rule." — By this is meant that portion of the Guide
which is used in drafting the skirt of the dress; also, in determin-
ing the " angle or slope " of the gores, curving the bottom of the
skirt, and measuring the widths of biasses, ruffles, etc.

The " Large Arm-Size." — This is designed for extreme sizes, or
when the arm of the person is larger than the measures printed
on the "Arm-size" of the "Front Guide."

[8]

The "Small Arm-Size." — This is designed for infants and
children.

The " Miniature Dress- Guide." — By this is signified the sev-
eral parts constituting the large "Dress-Guide," reduced in size to
a scale of miniature proportions; its chief design being to make
practicable the teaching of this science in classes ; and, although not
embodying the full number of figures contained in its representa-
tive, the "Large Dress- Guide," yet, by special adaptation, in con-
nection with what is termed the "Average Measures," it is made
capable of producing, " in miniature," all the various garments
embraced in a lady's or child's wardrobe.

The "Average Measures." — By this term is implied those
measures which represent the general average size of a lady's form,
and which are given in connection with the Diagrams of this work
as a basis for elementary practice in drafting with the " Miniature
Dress-Guide."

Remark. — It will be observed that the term " Dress-Goods," used
in the rules and Diagrams of this work, is designed to indicate the
materials on which life-size garments are drafted ; yet, it is intended
that the student, while under instructions, should use a suitable
quality of paper, such as light manilla; viz., from 25 to 30 pounds
weight to the ream, free from specks; in connection with which (as
the remainder of the outfit necessary) should also be procured a No.
2 lead-pencil, a pair of small scissors, and a penknife or pencil-
sharpener.

[9]

MANNER AND ORDER OF TAKING THE MEASURES.

1st. Breast. — Draw the Tape-line loosely over the fullest part of
the Bust, measuring across from arm to arm.

2d. Around Waist. — Take this measure tight or loose, as you
wish the dress at this part.

3d. Around the top of the Arm. — Take the measure close.

4th. Length of Waist (under the arm). — Place the Tape-line
directly underneath the arm-curve, and measure straight down to
the waist or hip, as long as the dress should be worn.

5th. Length of Waid up Center of Front. — Take this measure
from the waist or bottom of belt (as low down at front as the dress
can be worn), up to the Neck (as high as may be desired).

6th. Around the Neck — Allowing the Tape-line to meet closely
around so as to admit the end of the fore-finger underneath.

7th. Shoulder. — Measure down the shoulder-seam, from the Neck
to the top of the Arm-size, as long as fashion or taste may require.

8th. Aiyross the Bach — Draw the Tape-line directly across the
back, over the shoulder-blades, (from arm to arm.

9th. Length up Center of Bach. — This measure should be taken
from the bottom of the waist or belt, to the Neck (as high as you
wish the dress).

[10]

SUGGESTIONS on the POSITION of the person whQe being measured;
also, on the proper manner of placing the Tape-line at the different
points of the Form.

While being measured, the ladj should stand in her natural po-
sition ; viz., erect, and with arms down.

To prevent mistakes by beginners (or those unpracticed), it is ad-
visable to take the measures over a well-fitting dress.

For Breast. — The end of the Tape-line should be placed near the
lower part of Arm-curve (in front, not underneath), pressing suffi-
ciently to feel the muscle of the Arm, at the same time allowing the
Tape-line to pass loosely over the fullest part of the Bust, in an arched
or curved direction, until it reaches the same muscle (in front of
the Arm) at the opposite side of the breast. The measure across
the Bust can be made tight or loose, according to the manner in
which the Tape-line is drawn over the Bust.

(Jaution. — It is important not to take this measure too tight.

Around the Waist. — The Tape-measure should be drawn tight,
eo as to allow for its being taken over the dress.

Arm-Size. — Take the measure around that part of the arm of the
dress, where the sleeve is sewed in, drawing the Tape-line loose,
or tight, according to the size of the person. As a general rule,
for a large-sized arm, this measure should be taken closer than for
a medium-size or small arm. A lady with very poor or small
arm, always appears in better proportion to have a rather loose
sleeve and arm-size. In judging of the correct size, it is advisable
to measure and compare with the arm-size of the dress the lady
has on.

Length of Waist (under the arm). — The Tape-line should be placed
directly underneath the arm, and the measure taken straight down
to the bottom of the waist (on the hip) as long as the dress, at this
part, can be worn.

Caution. — If you should take this measure very low down on the
Waist, then remember to have the Tape-line placed as low, in pro-
portion, when you take the measure up the center of front.

N. B. — Both these measures serve an important part in regulating
the slope of the shoulder. This same rule should be observed in
measuring for length up the center of back.

Length up Center of Front. — This measure should be taken from
the bottom of the Waist or belt (as low down as is natural for the
dress to be worn), up to the Neck at front.

Caution. — This measure should be very carefully and accurately
taken, as it determines the height of the Neck at front ; it also
forms a basis in finding the natural height or slope of the shoulder.

Neck. — In taking this measure do not measure over the dress or
collar, but on the Neck, allowing the Tape-line to just meet around
(with end of forefinger underneath). Too loose a measure at this
part will cause too much fullness on the upper part of the Shoulder,
near the Neck.

N. B. — It is always better to take a close measure at this part,
and then stretch the Neck of the dress before putting on the band
or cord.

Shoulde)'. — In measuring this part of the form, place the Tape-
line up to the side of the Neck, as high as the band or cord of the
dress ; then measure down the Shoulder-seam, from the Neck to the
top of Arm-size (as long as you wish the Shoulder of the Dress).

N. B. — For ladies with large bust ; also, for loose waist and Wrap-
pers, the Shoulder-measure should be taken from J an inch to 1 inch
longer than usual. This gives a better proportion in drafting the
pattern.

Across the Back. — Place the end of the Tape-line directly at the
Arm, passing it over the Shoulder-blades from Arm to Arm.

Length up Center of Bach. — The end of the Tape-line should be
placed on the Waist, below the belt, (as low down as the dress can
be worn), then measure up to the back Neck (as high as you wish
the Neck of the dress)

[12]

Bemaric — In finding the proportions of the se\^ral parts of the
form, by the process of measuring just given, it is important to re-
member that upon the accuracy of the measures and their correct
application in drafting depends the perfect fit of the garment. It
is also to be understood that the method of measurement previously
described is applicable alike to every style of garment, whether
loose-fitting or tight, with this difference : viz., that, for loose and
half-loose garments, an addition of 1 or 2 inches should be made
to the breast-measure when drafting, and from 2 to 3 inches should
be added to the measure around the waist for fullness to correspond.

N. B. — When talcing the measures of the person, always turite them
down in the same order as given below.

AVERAGE MEASURES.
INCHES.

18 — Breast.

24 — Around the Waist.

13 — Arm-Size.

8 — Length of "VVaist, under the Arm.
13 — Length up Center of Front.
12— Neck.

7— Shoulder.

13 — Across the Back

16 — Length up Center of Back.

SKIRT MEASURE.

First — Measure from the Waist down the Center of Front
Second — Measure down the Seam at the Side.
Third — Measure down the Center of the Back.

AVERAGE SKIRT-LENGTHS FOR TRAIN DRESS.

INCHES.

40 — Center of Front.
40 2 — Seam Next Front.
42^ — Seam at the Side.
46 — Seam Next Back.
48 —Center of Back.

N. B.— For average Skirt-Lengths for Short Dress, Basque, Sacque, etc., see Dia-
grams representing said garments.

THE

Science and Geometry of Dress.

PART FIRST.

ELEMENTARY RULES AND DEFINITIONS.

Xjxsssoixr 1.

Diagram 1. — This Diagram is designed to represent the Front
of Dress- Waist in its general shape and outline, with the names and
location of the Points, Curves and Lines forming the basis of the
measurements used in drafting the Front of Dress-AVaist.

Diagram 2. — This is designed to show the proper position of the
Front Dress-Guide on the Goods in the first stage of drafting.

The heavy line, running parallel with the Front edge of Dress
Guide, indicates the two Selvage-edges of the Dress Goods placed
together in position for drafting.

The dots composing the two lines running across the Diagram
near its center, represent the measurement of the Breast ; and the
dots composing the line running across the Diagram near the bottom
denote measurements around the Waist.

[14]

The figures and large dots, marked 18* IS* Breast; also, 24« 34*
and 44* Around the Waist, denote average measures used by stu-
dents in drafting while under instructions.

The 1-inch space between the edge of Dress-Goods and the Front
edge of the Dress-Guide , denotes the space allowed for Hem or
Curve, and is required for all Waists which are open at the Center
of Front.

How to Draft the Front of Dress-Waist.

[Open at the Centee.]

The Proper Position of Front Guide on the Goods when Dotting at the
Measures for Breast and Waist.

First arrange the Dress-Goods or lining in the following position,
viz : Fold the Goods double, by placing the two Selvage-edges exactly
together, and directly in front, with the Top or upper end of the
Goods at the left-hand side.

Rule 1. — Place the Front Guide in the position represented by
Diagram 2, viz : with the Point of Front-Neck, resting at the Top or
upper end of the Goods, and the Front edge of the Guide, placed par-
allel with and 1 inch distant from the Selvage-edge of the Dress-
Goods (all the way down) ; then draw a line along the Front-edge of
the Guide from the Front-Neck-point to the bottom of the Waist.
This is called the Hem line.

Rule 2. — Keep the Guide in the position just described, and pro-
ceed to make dots through the perforations marked 18* 18* Breast,
and 24* 34* and 44* Around the Waist, as represented by the large
dots in Diagram 2.

Explanation. — The figures 24 denote the actual size Around the
Waist, and the two spaces occurring between (24* 34* and 44») in-
dicate the additional allowance required for the taking up of the
two Darts at the Front of Dress-Waist — each space representing ten
numbers, which is equivalent to the width of one Dart.

N. B. — See special remarks on Dart Sizes.

«}

« 1

■s S

o S

4) -w,

— \

■^^^*

:2 -3

Jt2

^^^

•

■*
■^

PS "^-s

► is

•a:
1;

ft s,1

D
u. U

§-1

^4^

■

Front Edge

of Dress Guide.

inch for

aem or curve.

Edge of Dress

Goods.

€

"S-s

■1-3

1 a

red lines, po
'ront of Dre

Length of "Waist

under the Arm

■""^^

P5 -^"^

•"•*■

o ^:

-s

-2 ^

•s

1
CQ

•1

s
<

-k3

'«^

Center of Front.

Length up Front.

1. inch for hem or cui-ve.

£4lge of Dress Goods.

Jl Front Neck.

Front Edge of Dress Guide.
Length up Center of Front.

K<l$?e or Uross Goods.

[17]
How to Shape the Front Arm-Carye.

See Diagram 4.]

Rule 3. This is done by placing the two dots B» B* (printed
on the Front Arm-Curve of the Guide), exactly at, and just touching
the two dots 18* IS* previously made on the Goods for Breast
Measure. While the Guide remains in this position, draw a line
around the edge of the Arm-Curve, from 13, Arm-Measure (printed
on the edge near the top), to the figures 13, near the Arm-Point.

N. B. — For full explanations on the different Arm Sizes for
Cloaks, Children, etc., see special remarks under that head.

How to Draft Length-of- Waist.

[Under the Arm.]

Rule 4. — Place the Arm-point of the Guide, exactly at, and just
touching the Arm-point on the Goods, with the Length-of-\Vaist
edge of the Guide placed close to, and on a line with the dot marked
44. (the measure Around-the-Waist as shown in Diagram 4). Then
draw a line along the edge of the Guide, from the Arm-Point, down
to the figure 8, denoting the Length of Waist.

Caution. — In drafting this line great care should be taken not to
stop at the 44* Waist Measure dot, but continue the line to the fig-
ure denoting the length required.

Explanation. — The figures for Length-of- Waist sizes are printed
down the Length-of-Waist edge of Guide.

The Proper Position of the Dress-Guide when Drafting the Waist- Line

at Front.

Rule 5. — Place the Front-edge of Dress-Guide, close to and par-
allel with the Hem-line, then move the Guide downward, in the
same parallel position, until the end of Length-of-Waist line ap-
pears just below, and on a line with the Bottom-edge of Dress Guide ;
then draw a line across from the end of Length-of-Waist line, (indi-
cated by figure 8), to the Hem at front. See Diagram 4.

Explanation. — This Line forms a division of the Waist and
Skirt of the Dress, and it is important that it be drafted accurately,

[18]

by having the Guide in the exact position described ', otherwise, the
results at the Neck and Shoulder would bo imperfect. This line also
forms the basis for measuring up the Center of Front Waist.

How to Measure For Length Up Center of Front.

Rule 6. — Place the Front-edge of the Guide close to and paral-
lel with the Hem line of the Goods, and the Bottom-edge of Guide
resting on the Waist-line ; then make a dot on the Hem-line at the
figures indicating the Length-up-Front : viz., 13, (printed on the
Front-edge of the Guide.)

Explanation. — This measure is used for the purpose of determin-
ing the exact locality or Point of the Front-Neck. It also regulates
the slope or angle of the Shoulder.

How to Draft the Front-Neck.

Rule 7. — Place the Front-Guide in the position represented by
Diagram 3: viz., with the measure 12, Front Neck, placed on a
line with, and directly opposite the dot 13, (previously made on the
Hem-line), to denote Length up Front; observing at the same
time that the Front-edge of Guide is placed close to, and paral-
lel with the Hem-line (all the way d )wn) ; then make dots at 12
Front Neck, and 12 Upper-Neck. Now place the Neck-Curve of
the Guide directly underneath, and touching the dots just made for
Neck-measure; then draw a line from the Hem at Front to the Upper-
Neck-dot on the Goods, using for this purpose the Neck Curve of
the Guide. This shapes the Front-Neck, as shown by Diagram 4.

How to Draft the Front Shoulder.

Rule 8. — Place the Upper-Neck-Point of the Guide directly at
the Upper Neck Point on the Goods, at the same time having the
Shoulder-edge of Guide resting on the top of Arm-Curve, at the
figures 13, as indicated in Diagram 4. While the Guide remains
in this position, draw a line on the Goods from the Upper-Neck-
Point to the figure 7, (the Shoulder-Length).

Explanation. — The figures printed on the Shoulder-edge of the
Guide, indicate the different Shoulder-lengths.

[19]

How to Re -Shape the Upper Part of Front Arm -Curve.

Rule 9. — Place the lower part of the Arm-Curve of the Guide
to the same part of Arm-Curve on the Goods, at the same time
having the top of Arm-Curve resting at the end of the Shoulder-
line^ (as indicated by figure 7) ; then draw a line from the end of
Shoulder-line to the loioer Breast-dot, as shown by Diagram 5.

Explanation. — The Arm Curve, below the lower Breast-dot,
should not be changed.

How to Find the Proper Height of Darts at Front.

Rule 10. — Lay the Dart Rule (across the outline of the Front
Waist already drafted on the goods) in the same position as shown
by Diagram 5 : viz., with the wide end of the Rule placed close to
and parallel with the Hem-line, and the upper edge (near the point)
placed directly underneath the lower part of Arm-Curve. Now,
while in this position, make dots through the perforations marked
*' 1st and 2d Darts for Ladies," (printed near the under edge of the
Dart-Rule).

To Measure Dart -Space at the Bottom of Waist.

Rule 11. — Measure on the Waist-line 11^ inches from the
Hem-line, and make a dot. Now shape the First Dart by placing
the pointed end of Dart-Rule close to the dot made on the Goods
for the top of the First Dart, at the same time having the Side of
Dart-Rule close to the l|-inch dot previously made on the Waist-line
then draw a line down each side from the Point to the Waist-line.

The Second Dart is shaped in the same manner, leaving half-an-
inch space between each Dart on the Waist-line.

To Draft the Center Line of Darts.

Rule 12. — Make a dot on the Waist-line in the center of each
Dart ; then draw a straight line from this dot to the Point, as shown
in Diagram 6

Explanation. — This line is designed as a guide in basting the Goods
down the center of the Dart before sewing the sides together.

£tl^e of Dress Goods.

rJT"

1. inch for hem or curve.

£tlge of l>ress Goods.

[21]

N. B. — Allow for Seams, as Shown by Diagram 6. The inner
line is designed for Basting, and the outer for Seams.

Diagram 6, — This represents the Front of Dress-Waist in its
finished condition, showing the re-shaping of the Arm-Curve; also,
the dotted lines, denoting the Center of Darts, the space allowed for
Seams, and the proper shape of the Curve at Front.

This completes the Front of Dress-Waist.

XiXSSSOiMr 2.

Diagram 7. — This is designed to represent the Back of the Dress-
Waist in its general shape and outline ; also, the location and names
of the various Points, Curves and Lines forming the basis of the
measurements used in drafting the Back of Dress-Waist.

Diagram 8. — This is designed to show the proper position of
the Back Dress Guide on the Goods in the first stage of drafting
the Back of Dress- Waist.

The heavy line, running parallel with the Center of Back edge of
Guide, indicates the Fold of Dress-Goods in position for drafting.

The large dots 13* 13* in the two dotted lines running crosswise
of the Diagram near the center, represent the average measurement
across the Back ; and the dot 24* with the line running crosswise
near the bottom of the Diagram, represents the average measurement
Around the Waist.

N. B. — These Average measures are designed to be used in draft-
ing only while under instructions. »

Center of Back, Edge ot Guide.

£cl£re of Dress Goods.

^^A

•g

"*--^...l^Jll8t^

§ y

73 .

s ^

Center of Back.

[23]
How to Draft the Back of Dress- Waist.

Closed at the Center.

[See Diagram 8.]

First bring the two Selvages evenly together ; then place the top
of the Goods at the left-hand side, and the Fold-edge, (or middle of
the Goods,) directly in front.

Rule 13. — The Back-Dress-Guide should now be placed on
the Goods in the same position as shown by Diagram 8 ; viz., with
the Neck-Point of the Guide at the Top, and the Center-of-Back
edge of Guide close to and parallel with the Fold in front. Then,
while the garment remains in this position, make dots on the Goods
(through the perforations on the Guide) at 13* 13* Back-measure,
and 24. for measure Around the Waist.

How to Shape the Back Arm-Curve.

[See Diagram 10.]

Rule 14. — This is done by placing the two dots B* B. (printed
on the Arm-curve of the Back-Guide) close to and on a line with
the two dots made on the Goods at 13* 13* Back-measure. Then
draw a line downward, from 13, Arm-measure, to the Arm-point,
following the edge of the Curve.

N. B. — For full directions on Arm-Sizes, see special notes under
that head.

How to Draft Length of Waist,

[Under the Arm.]

Rule 15. — Place the Arm-point of the Back-Guide exactly at
and touching the Arm-point on the Goods ; observing at the same
time that the Length-of-Waist edge of Guide is placed close to
and on a line with the dot 24* (Around-the-Waist measure), as
shown in diagram 10; then draw a line along the edge of the Guide,
downward, from the Arm-point to the figure 8, which denotes
Length of Waist.

How to Draft the Bottom of Waist -Line.

Rule 16. — Place the Center-of-Back edge of Guide close to and
parallel with the edge or Fold of Goods, and the bottom-edge of the

2 8^

:S s

.SP

Length up Center of Back.

Center of Back.

Length up Center of Back .

[26]

Guide resting directly on the end of Length-of- Waist line ; then
draw a line straight across from the figure 8 to the Center of Back.
See Diagram 10.

How to Measure on the Woods for Length Up Center-of-Back.

Rule 17. — Place the Center-of-Back edge of the Guide close to
and parallel with the Fold of Goods, and the bottom-edge of the
Guide resting on the Waist-line ; then dot on the edge of Goods at
the figures 16, (printed on the Guide for Length up Center of Back).

How to Dot at the Measure for the Back-Neck.

Rule 18. — Place the Back-Guide in the position represented by
Diagram 9 ; viz., with the figure 12, Back-Neck-measure, placed on
a line v,^ith and directly opposite the dot 16, (previously made on the
edge of Goods), for Length up Center of Back; observing at the
same time that the Center-of-Back edge of Guide, is on a line with
the Fold of Goods all the way down ; then make a dot (on the Goods)
at 12, Back-Neck. Now slip the Guide downward until the Neck-
edge of the Guide is directly underneath and on a line with the dots
just made ; then draw a line from the figure 16 (on the edge), to
12 as shown in Diagram 10.

How to Draft the Back-Shoulder-Line.

[See Diagram 11.]

Rule 19. — Place the Back-Neck-point of the Guide exactly at
and touching the Back-Neck-dot on the Goods, at the same time
having the Shoulder-edge of the Guide (near the lower end) resting
on the top of Arm-curve, at figure 13 ; and, while the Guide is in
this position, draw a line from the Back-Neck-point to the figure 7,
(printed on the Shoulder of the Guide), denoting the length. •

How to Re-Shape the Back Arm-Curve,

[See Diagram 11.]

Rule 20. — Place the Arm-point of the Guide exactly at and
touching the Arm-point on the Goods, at the same time having the
upper part of Arm-curve placed at the end of the Shoulder-line,

»5

^
^

^
-<

Ktlge ol Wross Goods,

[28]

(indicated in Diagram 11 by figure 7;) then draw a line from the
end of Shoulder to the Arm-point (as shown in Diagram 11).

How to Shape the Side-Form of the Back-Waist.

Rule 21. — Place the Side-form-Rule of the Guide in the same
position on the Goods as shown in Diagram 11 ; viz: First make a
dot at the Waist-line (on the Goods) half-an-inch from the center of
Back ; also, make a dot on the Arm-curve, a little below half-way ;
then place the upper edge of the Side-form-Rule close to these dots,
and draw a line from the Arm-curve to the Waist, (using the upper
or most rounded edge for this purpose).

Explanation. — The shape of the Curve can be varied, more or
less, as the difference in forms and change in fashion may require.

Diagram 11. — This represents the Back of Dress-Waist in its
finished condition, showing the re-shaping of the Arm-curve, the
shape and position of the Side-form, lines for Seams, etc.

This completes the Back of Dress- Waist.

Xixassozu- a.

How to Draft Lady's Goat-Sleeve.

^ [See Diagram 12.]

First : Measure Around the top of the Arm ; second : Down the
inside Seam of the Sleeve ; and, third : Around the Wrist, suffi-
ciently loose for Sleeve to slip over the hand.

Rule 22. — Place the Goods in proper position, with the Selvage-
^edge directly in front, and the top or upper end of Goods at the
left-hand side ; then proceed as follows : First : Measure downwards,
from the top of Goods 2^ inches, and make a dot directly on the

[29 J

edge. Second: Make a dot on. the edge of Goods 18 inches below
the 2J-inch dot first made. Third : Make a dot on the edge of
Goods half-way up the length of the Sleeve ; viz.; 9 inches. Fourth:
Make a dot for inside curve 1 inch across from the 9-inch dot.
Fifth: Make a dot 7 J inches across from the 1-inch dot. Sixth:
Make a dot at the top of the Goods 7J inches distant from the 21-
inch dot first made. Seventh : Make a dot 4 inches straight across
from the 18-inch dot at the "Wrist. Eighth: Make a dot li^ inches
below the 4-inch dot.

How to Shape the Ontline of the Sleeve,

Beo'in at the 2i^-inch dot and make a curved line to the 7i-inch
dot, using the upper edge of the Side-form-Rule. This forms the top
of the Sleeve. Now shape the outside Curve of the Sleeve by placing
the Dot-A part of the Side-form-Rule directly on the 7 J-inch elbow
dot, at the same time having the small end of the Rule resting on
the 7 J-inch dot, at the top of the Sleeve ; then draw a line on the
upper edge, from the 7i-inch dot at the elbow, to the 7 J-inch dot at
the top. Now reverse the Side-form-Rule by placing the Dot-A
part on the 7|-inch elbow-dot, with the small end resting on the IJ-
inch dot at the Wrist; then draw a line on the curved edge of Rule,
from the elbow-dot to the Wrist.

The inside Curve of Sleeve is formed in a similar manner, by placing
the Dot-A part of Side-form-Rule at the 1-inch dot, and drawing
a curved line to the 2|-incli dot first made. Now reverse the Side-
form-Rule by placing the small end at the 18-inch dot, and the
Dot A part of rule on the 1-inch dot, and drawing a line on the
upper edge of Side-form-Rule. Next draw a straight line across at
the Wrist from the IJ-inch dot to the 18-inch dot.

This completes the upper part of the Sleeve.

The under part of the Sleeve is shaped in the same manner, except
it is made 1 inch narrower on the outside seam, and curved inwardly
at the top.

N. B. — The size and shape of the Sleeve can be varied by adding
to the measures at the top, tho Elbow, the Wrist, and the Lengtli, as
may be desired.

[31]

XLi lES IS @ O INT -a

Dress-Waist, Closed at the Tront.

[See Diagram 15.]

Rule 23. — Place the Front-Dress-Guide on the Fold of Goods
in the position indicated by Diagram 15 ; viz., with the Front edge
slipped 1| inches over the edge of Goods, in such position that the
dots of the Front-Neck will be resting directly on and parallel with
the edge of Goods underneath.

Caution. — If this position of the Front-Guide on the Goods
should be overlooked or neglected, it would seriously affect the shape
and fit of the Dress by mahing it too loose at the Front-Neck and
across the Breast.

It is also equally important to have the Front-edge of the Guide
slipped over the edge of Goods (in the same manner as described)
when dotting for the Front-Neck; in which case the figure 12, Front-
Neck, will be directly over the dot made for Length-up-Front,
and on a parallel line with the edge of Goods underneath ; then dot
as usual at 12, Front-Neck, and 12, Upper-Neck.

In all other respects, this Waist is drafted according to the Rules
given for Dress-Waist open at the center of Front.

Dress-Waist, Open at tlie Back,

[See Diagram 16.]

Rule 24. — Place the Back-Dress-Guide in the same position
as shown in Diagram 16 ; viz., with the Center-of-Back edge of
Guide 1 inch distant from and 23arallel with the Selvage-edge of
Goods • then draw a line for Hem or Lap. Next proceed to dot and
draft in the same manner as for Waist dosed at the Center of Back.

Caution. — The measure for Length, up Center of Back, should be
applied on the Hem of the Goods ; and when dotting for Back Neck,

^ o

Edge of Dress Giiide slipped back.

1 inch for lap.

Edge of I»res»« Ooo<l»4.

« s

E«i);c «f Dress Ooods.

I'^dge of Dress Guide

[33]

the edge of the Guide should be placed close to and parallel with this
line, as indicated by Diagram 16.

How to Draft the Front of Loose- Waist.

[See Diagb^m 17.]

Rule 25. — Place the Front-Dress-Guide on the Goods in the
same position as shown by Diagram 17; viz., with the Front-edge
placed close to and parallel with the 1-inch line made for Hem.

N. B. — The Front of Loose- Waist is drafted in the same manner,
and with the same measures as the Front of Tight Waist, with the fol-
lowing exceptions ; viz., 2 inches should be added to the Breast meas-
ure, for fullness. For example : If the Breast-measure be 18 inches,
then dot on the Guide at 20, on both rows of figures for Breast —
also, adding the width of two darts for fullness at the Waist, by dot-
ting at the figures 24* 34* and 44» This fullness is afterwards taken
up in gathers at the Waist.

How to Draft the Back of Loose- Waist.

[See Diagram 18.]

Rule 26. — Place the Back-Dress-Guide on the Goods in the
same position as shown by Diagram 18; viz., with the Center of
Back edge of Guide placed close to and parallel with the Fold of
Goods.

N. B. — The Bach of Loose-Waist is drafted in the same manner
and with the same measures as the Back of Tight- Waist, with the
following exceptions ; viz., 2 inches should be added to the measure
across the Back, for fullness. For example : If the measure across
the Back be 13 inches, then dot on the Guide at 15, on both rows of
figures, denoting Back-measure ; also, adding 3 inches to the measure
Around the Waist, or sufficient fullness to make the Length-of-
Waist-line appear to be almost straight down from the Arm-point
to the Waist-line.

N. B. — In adding fullness to the measure Around the Waist,
always use the straight-edge of Dart-Rule or Skirt-Rule.

2 -5

;_, '-^.

•

o 6

1— (

(»

t:~

•

*— ta » — — ^-"

.'«"

^
^

•

lU
CO

•
to

Center of Back.

I-t

-c

..J

.2 CO

<s <»

+3 -W

(B (D

CD '*-

hi M

t)-r

-1

n -»^

■

ullnes
lies to
lire.

^ a

=>-• t3 tK

§.s §

•«t<

•

p^ iM S

•

■*

1^ ^^\^

^ ^

)

•

•>*

fe>-l

/ ~""~"

•"■-

■— *— r-'

■f

ffiS

p; m

-«l

Q i

<» /

•

h
z
o
of
u.

•i

Center of Front.

■

1 inir

1 for hem.

l-klge of I>i

<iss

Oouds.

[34]

Explanation, — After the Front and Back are drafted, then mark
off a line around the bottom of skirt for Belt. This should be IJ
inches wide.

This completes the Loose- Waist.

Xji IE: Si @ <3 z^ s.

Front-Waist, With Yoke.

Diagram 19. — This represents the Front of Dress- Waist, with
Yoke terminating at the Waist-line. This style of Waist is com-
posed of two parts, the upper part forming the Yoke, and the lower
part the Side-form, which is extended 2 inches beyond the Arm-
curve, for fullness, to be gathered into the Yoke. The 2-inch dot
on the Waist-line denotes distance from the Hem-line, and is the
lower terminus of the Yoke ; and the 3-inch dot on Arm-curve, de-
notes distance from the Shoulder, and forms the upper terminus of
the Yoke.

Rule 27. — First, Dra/t the outline of the Front Waist, in the
usual manner, according to the rules previously given. This being
done, proceed to Shape the Yoke by placing the Side-form-Rule at
the dots and figures denoting the distances, (as shown in Diagram
19,) and drawing a line on the upper edge of the Rule, from the
Waist-line to the Arm-curve, extending the line straight across to
the two-inch dot (for fullness); then make another dot, 2 inches
straight across, from the lower 18 Breast-dot.

Next, re-shape the lower part of Arm-curve, by placing the lower
B-dot of the Guide to the 2-inch dot last made on the Goods ; and,
while the Guide remains in this position, draw a line from the 2-
inch dot at the upper end of Side-form-line, to 13, near the Arm-

Center of Back.

h
<

h
Z

.:?

• 5;

Center of Front.

1 inch i'oT hem.

K«ls'e olI>ress <jiooils.

[36]

point, and from thence downward to the 8-inch dot, (denoting
Length-of-Waist,) as shown in Diagram.

Explanation. — The two Spaces indicated by 24* 34* and 44* denote
fidlnoss added to the Waist-measure, (each space being equal to 2
inches) and is taken up in gathers.

jN". B. — This style of garment can be made open at the Front or
Back, as may be desired, and is applicable to Ladies' Wrappers,
Morning-Robes, Night-Dresses, etc.

Back- Waist, With Yoke.

Diagram 20. — This represents the Back of Dress-Waist, with
Yoke, terminating in a point, at the Center of Back on the Waist-
line.

Rule 28. — Draft the outline of Back- Waist in the usual man-
ner. This being done, proceed to shape the Yoke, by placing the
Side-forra-Rule at the dots and figures, denoting the distances,
shown in Diagram, and drawing a line (on the upper-edge of the
Rule) from the W aist, (at the Center-of-Back) to the 2-inch dot near
the Center of Arm-curve, extending the line 2-inches beyond the
Arm, for fullness. Next make a dot, 2 inches straight across from
the lower Back-measure.

Now re-shape the lower part of Arm-curve, by placing the lower
B-dot of the Guide to the 2-inch dot last made on the Groods, and
draw a line from the 2-inch dot at the terminus of the Side-form-
lino, to the 2-inch dot opposite the Arm-point, and thence down-
ward to the 8-inch dot, denoting Length-of-Waist.

Explanation. — The 3-inch dot on the Length-of-Waist line de-
notes fullness added to the Waist-measure.

N. B. — This fullness should always be measured by the inchea on
the Dart or Skirt-Rule.

Waist-Toke, Pointed at the Front.

Diagram 21. — This is designed to represent the Front of Dress-
Waist, with Yoke terminating 6| inches below the Neck.

-b»

I-,

■o

.2 e.

•^

"S .

•*

***»^

T i

•

its-

1 .---^

^- ^

1 «

' ^

• » ^s.

X "'"*""'

^«

y o

i^-S,

•m

4^ 0^1

-^ 1

'Si
1

es added for

O t»

^ CI

® 03

es Q

.9 --S

■d c:

- — i5- — —

J3 H

t/7 1

*"*■

■ — ••MM

c 9

1 i

.S f

^t*

T"--..

-r/

•*

X i

1-4

CO I

^ -fi

r**"--

■^Y

•CO

^ 1

^*v^ 1 <x>

i:>

— s/

.i \

I \

I .

-X

r-i

^^_

1 inch for

hein.

liklge of l>reH»« Goods.

[38]

Rule 29. — First draft the outline of the Front, in the usual
manner. This being done, shape the Yoke by placing the lower
part of Side-form-Rule at the Hem-line, 6|-inches below the Neck,
and the upper part, upon the Arm-curve, 3 inches below the Shoul-
der ; then draw a curved line from the 6 J-inch dot (on the Hem-
line) to the 3-inch dot, on the Arm-curve, extending this line 4
inches beyond, for fullness; then make a dot 4 inches straight
across from the lower Breast-dot. Now make a dot 4 inches straight
across from the 44-inch dot Waist-Measure, for fullness.

N. B. — This fullness should always be measured by the inches on
the Dart or Side-form-Rule.

Now proceed to re-shape the lower part of Arm-curve^ by placing
the lower B-dot of the Guide at the 4-inch dot made opposite the
lower Breast-dot, at the same time have the Arm-curve edge of the
Guide placed at the 4-inch dot at the terminus of the Side-form-
line; then shape the lower part of the Arm-curve from the end of
the Side-form-line to the Arm-point; and from thence downward 8
inches, for Length of Waist.

N. B. — The Bottom of Waist line should be re-shaped, as shown
in Diagram.

Back- Waist, With Yoke.

Diagram 22. — This represents the Back of Di-ess-Waist, with
Yoke terminating half-way up the Center of Back.

Rule 30. — Dra/t the outline of the Back- Waist, as shown in
Diagram. Next, Shape the Yoke, by placing the lower end of the
Side-form-Rule on the 8-inch dot at the Center of the Back, and the
npper part of Side-form-Rule on the Arm-curve, 2 inches below
the Shoulder ; then draw a line on the edge of the Rule, from the
8-inch dot to the 2-inch dot, extending it 4 inches beyond the Arm-
curve, for fullness. Next, make a dot 4 inches straight across from
the lower Back-dot ; then make another dot 6 inches across from
the 44-inch dot, for fullness at the Waist.

Now re-shape the lower part of Bach-Arm-(mrve, by placing the
lower B-dot of the Guide to the 4-inch dot opposite the lower
Back-dot, and drawing a line from the 4-inch dot above (at the upper

[39J

terminus of the Side-form-line) to the 4-inch dot opposite the Arm-
point, and thence downward to the 8-inch dot, denoting Length of
"Waist.

Explanation — This Yoke may be made pointed at the Back, the
same as at the Front, by measuring 10 inches downward (instead
of 8).

N, B. — In forming the Yoke, any shape or curve desired can be
obtained by varying the position of the Side-form-Rule.

[40]

PART SECOND.

Xj X3 s» s o 3>a- e^

Front of Sacque- Wrapper.

[LOOSE-FITTING.]

Diagram 23. — This represents the Front part of Loose-Wrapper.

The Waist of this garment is drafted by placing the Front-
Guide in the same position on the goods as indicated by Diagram
23, and following the directions given under Diagram 17, for draft-,
ing Front of Loose-Waist.

How to Find the Slope of the Side -Gore.

EuLE 31. — Place the A-point of the Skirt-Rule at the 8-inch
dot on the end of Length-of- Waist line, keeping the straight edge
of the rule exactly parallel with the Hem-line, as shown in the
Diagram ; then make a dot for the Side-Gore at figure 4, (printed
across the center of Skirt-Rule for Gores).

How to Draft the Line for Length of Skirt.

[At the Side.]

Rule 32. — Place the A-point of Skirt-Rule on the 8-inch dot
at the terminus of the Length-of- Waist line, and the Straight-edge
of Skirt-Rule on a line with the 4-inch dot, made for Side-Gore ;

DIAGRAM 23.

Front of Lady's Loose fitting
Sacque Wrapper.

24 34

Waist line.

[42]

then draw a line from the A-point at the Waist, downward to the
bottom of the Skirt, the required length; viz., 41 inches.

N. B. — It is important, in drawing this line, to make it of the
' same angle or slope all the way down ; and, as the Skirt-Rule is
not of sufficient length, it will be necessary to slip it downward a
little at each move, until the requisite length of Skirt is obtained.

How to Measure for Length of Skirt at the Center of Front.

Rule 33. — Measure from the Waist-line down the center of
Front, 40 inches, and make a dot.

How to Draft the Bottom of the Skirt.

Rule 34. — Place the curved edge of Skirt-Rule at the dots
denoting the length of the Skirt; and draw a line across the bot-
tom from the Hem to the Side.

Back of Sacque- Wrapper.

[LoOSE-FlTTING.]

Diagram 24. — This represents the Back Part of Loose- Wrapper.

Rule 35. — First, measure 5 inches across from the Selvage-edge
of Goods, and draw a line, parallel with the edge, all the way down.
This allows sufficient Goods for making a Gore at the Center of
the Back. Then proceed to draft by placing the Center-of-Back
edge of Guide, up to the 5-inch line, and the Neck-edge of Guide
slipped up to the top of the Goods ; then draft the Waist according
to rule 26, Diagram 18, for Back of Loose-Waist.

The Side-Gore, for the Bach, should now be drafted in the same
manner as described in rule for Front of Loose- Wrapper ; viz., by
placing the A-point of Skirt-Rule, at the end of Length-of- Waist-
line, and the Straight-edge exactly parallel with the edge of Goods;
then dot at the figure 4, denoting the slope of Side-Gore. Next
draw the line for Leugth-of-Skirt, as described in rule previously
given for drafting the Side-at-Front.

DIAGRAM 34.

Gore,/2

Back of Lady's Loose fitting
Saoque Wrapper.

h«

<4-

8 inches fullness.

SKIRT

[44]

The Center-qf-Back Gore is drafted by reversing the position of
the Skirt-Rule and placing the A-point, on the Waist-line at the
Center-of-Back, and the Straignt-edge, parallel with the edge of
Goods; then dot at figure 2, denoting the slope of Gore for the
Skirt at Back. Next draw the line for Length-at-Bach, by placing
the Straight-edge of the Rule on a line with the 2-inch Gore-dot,
and the A-point of Skirt-Rule touching the Waist-line at the Cen-
ter-of-Back; then draw a line from the Waist to the bottom of
the Skirt; viz., 42 inches.

N. B. — The Bottom of Skirt is shaped by the Curved-edge of
Skirt-Rule.

Explanation. — If a Gore is not desired at the Center-of-Back, the
Goods should be folded double, when commencing to draft, and
placing the Back-edge of the Dress-Guide up to the Fold, as
shown in Diagram 8.

XjIESSSOINT 7.

^ Front of Lady's Basque.

[See Diagram 25.]

The Waist of this garment is drafted according to Rules previ-
ously given under Diagrams 2, 3, 4 and 5.

How to Find the Slope of the Oore.

[At the Side.]

Rule 36. — This is done by placing the Skirt-Rule on the Goods
in the same position as shown in the Diagram ; viz., with the A-point
of the Rule resting at the end of Length-of- Waist-line (indicated

by the dot at figure 8), and the Straight-edge of the Rule placed
exactly parallel with the edge of Goods; then make a dot at the
figure 4 for Gore at the side, (printed across the center of Skirt-Rule
"Slope of Gores").

DIAGRAM 25.

LADY'S BASQUE j

Gore.

^ 4

[46]

How to Draft the Line for Length of Skirt.

[At the Side.]

Rule 37. — Keep the A-point of the Skirt-Rule in the position
last described; viz., at the terminus of the Length-of- Waist-line,
at the same time having the Straight-edge of the Rule moved close
to and on a line with the 4-iTich dot made for Gore ; then draw a
line from the A-point down to the 6-inch dot, shown by Diagram,
(denoting the Length of the Skirt at the Side).

Caution. — In drafting the Gores, it is very important that the
Straight-edge of the Skirt-Rule be placed exactly parallel with, or at
an equal distance from, the edge of Goods all the way down other-
wise the true slope can not be obtained.

For Length of Skirt, at the Front.

Rule 38. — Measure down the edge of Goods at the Front, 8
inches from the waist line, and make a dot to denote the Length of
Skirt.

How to Cnrre the Bottom of Skirt.

Rule 39. — Place the Curved-edge of the Skirt-Rule up to and
on a line with the dots made on the Goods for Length, and draw a
line from dot 6, at the side, to dot 8 on the edge of Goods at Front.

How to Shape the Curve Below the Waist-Line.

[See Diagram 25.]

Rule 40. — Measure downward from the outside line of the Second
Dart 1 inch, and make a dot; then place the under or curved-edge
of Dart-Rule in such position below the Waist-line as will give the
curve required, and draw a line from the Hem to the 1-inch dot.
This being done, extend the side of each Dart downward to the
Curved line.

Explanation. — The addition of this Curve to the Waist^ is an
allowance made for the shortening of the Waist, occasioned by the
taking up of the Darts.

[47]

How to Lengthen or Extend the Darts.

[Below the Waist-Line.]

Rule 41 — Place the Straight-edge of Skirt-Rule up to and par-
allel with the Center-line of the Darts; then continue this line
downward, by the same slope, to the bottom of the Skirt.

Tlie outline of the Darts should now be extended hclow the Waist
to the bottom of the Skirt, by drawing a straight line from the
terminus of each Dart, at the Waist-curve, to the terminus of the
Center-line, at the bottom of the Skirt. Both sides of the Darts
should be drafted in the same manner.

N. B. — The Cross-Dart at the bottom of the "Waist is shaped by
the under edge of the Dart- Rule.

This completes the Front of Basque.

Back of Lady's Basque, Without Flait.

[See Diagram 26.]

The Waist of this garment is drafted according to Rules pre-
viously given under Diagrams 8, 9, 10 and 11.

How to Shorten the Waist.

[At the Center of Back.]

Rule 42. — Measure upwards on the edge of Goods 1 incn from
the Waist-line, and make a dot ; then draw a line across from this
dot to the Side-form, (as indicated by Diagram 26).

Explanation. — This shortening of the Waist, at the Centre of the
Back, is an allowance made for the stretching of the Bias-seam of
the Back, and is required in all tight-fitting garments which have
the Waist and Skirt drafted together.

DIAGRAM 26.

LADY'S BASQUE ;
without Plait at Back.

DIAGRAM
27.

^-■' Gore.

Waist.

•"

^•'"

^-•"■'

Gore

•

[49]

How to Draft the Skirt.

[At the Back.

Rule 43. — This is done by placing the A-point of the Skirt-
Rule on the goods 'in the same position as shown in Diagram 26;
viz., with the A-point of the Rule resting on the Side-form-line,
1 inch above the Waist ; at the same time having the Straight-edge
of the Rule placed exactly parallel with the fold of Goods, (at the
centre of Back) ; then make a dot at figure 4 for Gore, (printed
across the center of Skirt-Rule).

How to Draft the Line for Length of Skirt*
[Next the Back.]

Rule 44. — Keep the A-point of the Skirt-Rule, in the position
last described, at the same time having the Straight-edge moved
close to the 4-inch dot, (made on the Goods for Slope of Gore);
then draw a straight line downward from the A-point to figure 9,
as shown in Diagram to denote Length of Skirt, next Back.

How to Curve the Bottom of the Skirt,

Rule 45. — Measure down the Centre of the Back (from the
figure 1 ) the required length ; viz., 10 inches, and make a dot, then
place the Curved-edge of Skirt-Rule up to and on a line with the
two dots made for the Length of Skirt, and draw a line along the
edge of the Curve from the dot 10, at the Center of Back, to the
dot 9 at the Seam next the Back.

How to Separate the Side -Form -A from the Back.

Rule 46. — This is done by cutting on the Side-form lino, be-
ginning at the bottom of the Waist, and following the dotted lines
to the Arm-curve.

[50]

How to Place the Side - Form - A on the Goods, to Obtain the Shape of

Side- Form- B.

[See Diagram 27.]

Rule 47. — After separating the Side-form-A, from the Back,
place it on the Goods as shown by Diagram 27, keeping it in the
same position, by pinning or otherwise, until its shape, or outline,
is obtained, by drawing a line entirely around its edge.

Caution. — In marking the outline of the Side-form on the
Goods, it is important that its original shape, as well as position
on the Waist-line, be preserved, by supplying the line, for the
piece cut out when forming the Plait.

How to Draft the Length and Gore of Skirt at the Side.

Rule 48. — The slope of this Gore is obtained in the same
manner as already described for " Gore next Back ; " also, the line
for Length at the Side and Back, and the Curve at the bottom of
Skirt, by applying the measures given in the Diagram.

N. B. — In drafting the Waists of all garments, it should be
remembered that Seams must be added, according to Diagrams 6
and 11.

For all Skirt-Seams allow half an inch outside of the Basting-
line, except at the Seam, running from the Side-form; for which
no addition is required.

This Completes the Back of Plain Basque,

[51]

Xjz:sso3\r 8.

Back of Lady's Basque.

With Box-Plait at the Side-Form.

[See Diagrams 28 and 29.]

This "Waist is drafted exactly in the same manner, and by the
same rules as given under Diagrams 26 and 27, with the following
exception ; viz., a Box-plait in the Skirt, extending from the Side-
form.

How to Draft the Plait at Back.

Rule 49. — This is done by measuring 2 inches across from the 1-
inch dot near the bottom of the Side-form, and drawing a line,
sloping upward half an inch, (as shown in Diagram).

Explanation. — The Skirt of this garment is drafted in the same
manner as described under rules given for Diagram 26, with the
following exception; viz., the A-point of Skirt-Eule should be
placed at the terminus of the 2-inch Plait, (above the Waist-line),
while the Straight-edge of the Rule, lays parallel with the edge of
Dress-Goods, as indicated in Diagram.

How to Draft the Plait at the Side-Form.

Rule 50. — First separate the Side-form-A from the Back, by
cutting around its outline, as indicated by the dotted lines ; then
place it on the Goods in the same position as Side-form-B; viz., 2
inches back from the edge, to allow for the Plait ; remembering also
to supply the original shape of the part previously cut off in form-
ing the Plait at the Back.

DIAGRAM 28.

LADY'S BASQUE;

with Box Plait at the Side-Formi

.Neck.

Top of Dress Goods.

'diagrams™

1-1 -rt

Gore. 4

[53]

Explanation. — The Curve at the terminus of the Length-of-Waist
line, and also at the Side of the Skirt, is shaped by the under-edge
of Dart-Rule, and should be varied to suit the shape and size of
different forms, and is not generally more than 1 inch at its widest
part.

The remainder of this garment is drafted according to Rule pre-
viously given for drafting skirt of Basque.

N. B. — The slope of the Plait at the top should be made in the
same angle as the top of Plait for Back ; viz., about half-an-inch.

Back of Lady's Basque.

With Box-Plait at the Side-Form, Without Seam in the Skirt.

[See Diagram 30.]

This Waist is drafted in the same manner and by the same rules
as given under Diagrams 26 and 27, excepting the Curve at Center
of Back, and the Box-plait at Skirt.

Rule 51. — Place the Back Dress-Guide on the Goods 1 inch dis-
tant from the edge of Fold, and draw a line its entire length.
Then proceed to draft the outline of the "Waist in the usual manner.

How to Shape the Curve at the Center of Back.

This is done by making a dot half-an-inch from the Center of the
Back at the Neck, (as indicated in Diagram), and drawing a line
downward to the 1-inch dot near the bottom of the Waist, and
thence downward to the 10-inch dot on the edge of Goods at the
bottom of Skirt. ,

How to Torm the Box -Plait.

Rule 52. — This is done by drawing a line across the bottom of
Side-form.- A, from the 1-inch dot at the Center of Back, and sloping
it downward to the bottom of Waist at the Side. The Waist-line
should now be extended 4 or 5 inches straight across the Goods, and

DIAGRAM 30.

LADY'S BASQUE;

with Box Plait at the Side Form,
and without Seam in the Sitirt.

^ Neck.

13 Arm measiiie.

8 T^ength ofWalst,

6 Liength.

Gore w 4

[55]

the Side-form-A separated from tlie Back and placed upon this line,
as indicated in Diagram by Side-Form-B.

N. B. — The Gore at the Side, and the Curve at the bottom of
Skirt, is obtained in the usual manner.

xjzasisoiN- e

Lady's Basque.

With Vest-Front.

[See Diagram 31.]

The Front of this garment is drafted in the same manner and
by the same rules as for Basque (see Diagram 25), with the fol-
lowing exceptions; viz., the Curve at the Center of Front, the
Side-Form line shaping the Vest-Front, and the Pointed-skirt,
terminating 12 inches" below the Waist, (sloping downward from the
bottom of the first Dart).

How to Shape the Vest- Front.

Rule 53. — Measure down the Shoulder-line 3| inches from the
figure 12, Upper-Neck, and make a dot; then place the A-point
of the Skirt-Rule on the 3J inch dot, with the lower part of the
Skirt-Rule resting on the Waist-line, (at the center of the first
Dart;) then draw a line frpm the Shoulder to the Waist-line (as indi-
cated in Diagram by the dotted line).

DIAGRAM 31.

LADY'S BASQUE;
with Vest Fronti

.Neck

7 Shoulder.
13 Arm.

'•IS I
,„ r Breast.

Arm-point.

, Around Waist.

[44:

$ Length of Waist.

'6 Length.

Gore. 4

^12 Length

from Waist Curve,

[57]

How to Make the Gore.

Place the A-point of the Skirt-Rule at the terminus of the first
Dart on the Waist-curve, at the same time having the Straight-edge
of the Rule parallel with the edge of Goods ; then dot at figure 1
for Slope of Gore and draw a line for Length of Skirt, in the
usual manner, to the 12-inch dot, as shown by Diagram.

Explanation. — This line for Length of Skirt is a continuation of
the Side-Form line, and, when the Darts are taken up, forms the
Vest-Front. After the Skirt is drafted, the lower part, next the
Front, is re-shaped by drawing a line 7 inches below the Waist, and
shaping it upward to figure 4, as indicated by the dotted line.

N. B. — The Curve at Front should be made by marking on the
under-edge of Dart-Rule, leaving a space of half-an-inch at the
Neck and Waist-line, and then continuing it downward to the bot-
tom of the Skirt; viz., 7 inches, drawing the line with the Straight-
edge of the Rule.

The shaping of the Darts below the Waist is done by the Straight-
edge of Skirt-Rule, in the manner described under the Rule given
for Diagram 25.

Back of Lady's Basque.
With Box- Plait at the Side-Form and Center of Back.

[See Diaoeam 32.]

Rule 54. — Place the Back of Dress-Guide on the Goods, 2 inches
distant from the edge, and proceed to draft the outline of the Waist
in the usual manner, by the measures given in the Diagram.

DIAGRAM 32.

LADY'S BASQUE BACK;

with Box Plait at the Center of Back;
also at the Side form; and without
Seam in the Skirti

iNeck

«; Length. ofWiaist.

6 liength.

10 Length.

Qore.A.

[69]

xjz:sisc^:n' lo

Lady's Half-Fitting Sacque.

[See Diagram 33.]

How to Draft the Front.

Rule 55. — Place the Front-Guide on the goods m the same
position as shown by Diagram. Then draft by the Rules used for
Basque, with the exception of making only one Dart, and dividing
the Front by Side-form, commencing at the Waist-line, 3 or 4
inches from the Hem, and terminating on the Arm-curve.

Explanation. — This Side-form (when preferred) may terminate
on the Shoulder, as in Diagram 31.

The Dart in this Sacque should be taken up directly underneath
the Side-form line at the Waist, to become a part of the continu-
ous seam running from the Shoulder to the bottom of the Skirt.

The curve at the center of Front; the curve under the Waist-
line ; the Cross-dart, and the Gore of the Skirt, etc., are all drafted
as previously described in the rules for Basque, under Diagrams
25 and 31.

Lady's Half-Fitting Sacque-

Without Plaits.

[See Diagram 84,]

How to Draft the Back.

Rule 56. — Place the Back-Guide on the goods 1 inch distant
from the edge, to allow for Gore at the Back-skirt. Then proceed
to draft by the measures given in the Diagram, in the same manner
as for the Back of Basque, in Diagram 26.

DIAGRAM 33.

LADY'S HALF-FITTING SACQUE.

13 Arm measure.

F,. Around Waist.
\S Length of Waist.

^J»6 Length.

Goce. 4.

DIAGRAM 34.

LADY'S HALF-FITTING SACQUE;

without plaits.

iNeck

[62]

Explanation. — The Side-form of this garment commences on the
Waist-line, 2 inches distant from the center of Back, and termin-
ates on the Arm-curve (a little below the center). After being sep-
arated from the Back, it should be placed on the goods in the posi-
tion represented by Side-form-B in Diagram 35. Then proceed to
draft the Skirt by the rules previously given for Skirt of Basque.

N. B. — The Gore at the Back-Skirt is drafted by reversing the
Skirt-rule, and dotting at 1-inch for the slope.

Xjx:sso3?a- xx.

Lady's Polonaise.

[Open at the Front.]

How to Di-af t the Front.

[See Diagram 36.]
Rule 57. — Place the Front-Guide on the Goods in the same
position as shown in Diagram, and proceed to draft the Waist ac-
cording to the rules previously given for Front of Lady's Basque.

Explanation. — The Skirt of Polonaise is drafted by the Rule pre-
viously given for Lady's Sacque- Wrapper, and the Darts by the Rule
for Lady's Basque.

Lady's Polonaise

With Box-Plait.

[See Diagram 87.]

How to Draft the Back.

Rule 58. — Place the Back-Guide 4 inches from the edge of
Goods, to allow for the Plait at the Center of Back ; then draft the
Waist in the same manner as described for Back of Basque (see
Diagram 30), by separating the Side-form; making the Gore at the
Side ; shaping the Box-Plait at the Back, etc., etc., applying the
measures printed on the Diagram for this purpose.

DIAGRAM 36.

12«N"eck

13 Ann.

Breast.

LADY'S POLONAISE;
Open at the Front.

Around Waist;

18 Length of. Wiaistt

,l>reck.

DJJLGEAM 37.

BACK OF LADY'S POLONAISE;

with Box Plait at the Side-Form:
also at the Center of Back.

SKIRT

[65]

Explanation. — The Side-form line may terminate at the Shoulder
instead of the Arm-curve, if desired, as in Diagram 32. The
length of Skirt, at the Side next Back, is 39 inches, and the length
of Skirt, at the Side next Front, is 34 inches, the difference in the
two lengths being 5 inches. This difference should be taken up in
three Plaits, near the upper part of the Skirt, at the Side next Back.
See Diagram 63, showing the proper distances for adjusting the
Loops and Plaits at the Back of Skirt.

Miss' Basque.

Closed at the Front.

[See Diagram 38.]

How to Draft the Front.

Rule 59. — Place the Front-Guide in the same position as shown
by Diagram 38 ; viz., with the Front-edge slipped over the Fold of
Goods 1 inch; then draft in the usual manner by the rule given for
Waist closed at Front ; remembering to add only one Dart to the
Waist-measure.

Explanation. — This Dart should be extended below the Waist-
line to the bottom of Skirt, the same as Lady's Basque. In all other
respects, the Front of this garment is drafted by the rule for Front
of Lady's Basque.

Caution. — It is important to remember that, when dotting for the
measures of the Neck, the edge of Front-Guide should be slipped
over the Fold of the Goods in the same manner as when first com-
mencing; otherwise, the Dress would be too large at the Front-
Neck.

Miss' Easque, Open at the Back.

[See Diagram 39.]
How to Draft the Back.

Rule 60. — Before commencing to draft this Waist, it is necssary
to draw a line parallel with and 1^- inches distant from the Sclvage-
edge of Goods, making it the entire length of the Back. (This

Nelvage Edge of Dress G*ods.

on
CO

Folded Kd

Front edge of Dress Guide slipped
one inch over folded edge of Goods.

[67]

line is to allow for the Gore of the Skirt at the Center of Back).
A second line should now be made for Lap; viz., 2 inches distant
from the line first made. Now place the Center-of-Back edge of
Guide close to this line, and draft the Waist in the same manner as
for Waist Open at the Back, applying the measures printed on the
Diagram.

N. B. — This style of Basque can be made with Side-form at the
Back, and Gored-seam extending from the same, by applying the
rules previously given for this purpose. (See Diagrams 26, 28, 30,
and 32).

Xji :e: s s» o 3\r 12.

Bodice-Waist.

[See Diagram 40.]

How to Draft the Front.

Rule 61. — Place the Front-Guide on the Goods in the same po-
sition as shown by Diagram, and proceed to draft by the rule pre-
viously given for front of Lady's Basque, being governed by the
measures and distances indicated in Diagram 40.

How to Form the Low Neck.

Rule 62. — First, measure 3 or 4 inches from the Neck down-
ward, and make a dot on the Heto-line ; next measure upward on
the Shoulder-line Ij inches above its end, and make a dot; then
place the Sidc-form-Rule up to these dots, moving it into such po-
sition as will give the curve or shape desired.

r!«3

■<

tt>

•^

Edge of Goods.

o .

be =s

02,

-r

•

Skirt Rule.

Hem or curve- 1 inch

Edge of Goods.

[69]
Bodice Waist.

[See Diagram 41.]

How to Draft the Back.

Rule 63. — Place the Back-Guide on the goods m the position
shown by Diagram. Then proceed to draft the Waist and Skirt by
the rule for Back of Basque, Diagram 26.

The Low Neck is shaped by placing the Side-form-Rule across
the Back, at the figures indicated in the Diagram; viz., 4 or 5
inches below the neck, and l^^ inches above the end of the Shoul-
der-line.

The Side-form is separated from the Back and placed at the top
of the goods in the manner previously described, and the Skirt
drafted in the usual manner.

Miss' Polonaise, With Side-rorm.

Closed at the Front.

[Sbe Diagram 42.]

How to Draft the Front.

Rule 64. — Place the Front-Guide on the goods in the position
indicated by the Diagram; viz., with the Front edge of the Guide
slipped 1 inch over the Fold-edge of goods; then draft the Waist
by the measures printed on the Diagram, in the same manner as
for Tight- Waist, open at the Front, remembering to add only the
width of one Dart to the Waist-measure.

How to Shape the Side 'form.

Rule 65. — First, make a dot on the Waist-line 3 inches from
the Fold-edge of goods; then place the lower part of the Side-
form-Rulc, on this line, and the upper part of the rule, resting at
the lower B-dot on the Arm-curve, and draw a line from the Waist
to the Arm-curve.

[71]

How to Draft the Skirt at Front.

Rule 66. — This is done by placing the A-point of Skirt-Rule
at the 3-inch terminus of the Side-form-line on the Waist, and the
straight-edge of the rule, parallel its entire length with the Fold-
edge of goods, and making a dot at the figure 2 for Gore, next
Front,

The Line for Skirt at the Seam next Front is drafted by placing
the Straight-edge of Skirt-rule up to the Gore-dot, and drawing a
sloping line from the Waist to the bottom of the Skirt; slipping
the rule down a little at each move, and keeping it in the same
slope all the way down, until the required length is obtained. The
remainder of the Front is drafted in the usual manner.

Explanation. — The Space indicated in the Diagram, under the
lower part of the Side-form-line, denotes the place for cutting out
and taking up the Dart ; the shape of this Dart being first obtained
by placing the Side-form-Rule in such position, under the Side-form-
Une first made, as to form a point a little above half-way ; and then
drawing a line on the edge of the rule downward, extending it
half-an-inch below the Waist-line. The extension of this Dart-
line below the Waist is to allow for the shortening of the Waist at
the Side-form, occasioned by the taking up of the Dart, and is
required in all Tight-Fitting Waists having a Side-form at the
Front.

Diagram 43. — This represents the Side-form-A of the Front

of Miss' Polonaise, placed on the goods as Side-form-B, together
with the forming of the Gore and Length of the Skirt, which are
drafted in the usual manner.

Miss' Polonaise.

Open at the Back.

[See Diagrams 44 and 45.]
How to Draft the Back.
Rule 67. — Place the Back-Guide on the Goods in the position

.Neck

MISS S OPEN BACK POLONAISE.

with Box Plait at Side Form.

* .<•'■

2<J -

[73]

indicated by the Diagram ; viz., with the Center-of-Back edge of
Guide slipped back 1 inch from the edge of Goods, to allow for
Lap; then draft by the measures printed on the Diagram in the
same manner as for Waist Closed at the Back.

JExplanation. — The shortening of the Back, the forming of the
Box-plait, the slope of the Gore, and the drafting of the Skirt, are
governed by the Rules previously given for drafting Back of Basque
(see Diagrams 28 and 29), excepting that in this garment the Plait
is 3 inches, and the Gore at the Side and next Back is 3 inches, in-
stead of 4.

Diagram 45. — This represents the Side-form A separated from
the Back and transferred in its entire outline to the top of the
Goods in the position indicated by Side-form B in the Diagram ;
viz., 3 inches back from the Selvage-edge, to allow for Box-plait at
the Seam next Back.

Explanation. — The Slope of the Gore at the Side-seam, the length
of the Skirt, etc., are drafted in the usual manner.

XjX3SIS03>T 13

Lady's Loose Sacque-Gloak.

Double-Breasted.

[See Diagram 46.]

How to Draft the Front.

Rule 68. — Place the Front Guide on the goods in the same po-
sition as shown in Diagram ; viz., 2| inches from the Selvage-edge
(to allow sufficient goods for the shaping of the double-breasted col-

DIAGRAM 46.
LADY'S LOOSE SACQUE CLOAK;
Double Breast.

Waist line.

SKIRT.

13 Arm.

Breast.

Arm Point

•

• Waist.

8 Length of \\

Gore. 4.

[75]

lar) ; then draw a line along the Front-edge of the Guide, its entire
length. Now proceed to draft in the same manner as for the Front
of Tight-Waist.

Eayplanation. — The Skirt at Front, for Sacque-Cloak, is drafted by
the same rule as the Front-Skirt of Lady's Polonaise, by applying
the measure printed on the Diagram for the gore and length.

The Spaces indicated by the figures 24, 34, and 44, denote full-
ness added to the measure around the Waist.

The Sloijing line, commencing 6 inches (on the edge of goods)
below the Front-Neck, and terminating at the 1-inch dot on the
Shoulder-line (below the Upper-Neck), denotes the line of fold for
Collar.

The upper portion of the Neck, (commencing at the intersection of
the lower part of the Neck-Curve with the dotted sloping line),
extending to the 1-inch dot at the Shoulder, should be cut away
for the sewing on of the rolling collar.

The Buttonholes, indicated by the large dots near the Selvage-edge,
and running lengthwise of the Front, are 3 inches apart, and the
Buttons are placed 5 inches across from the buttonholes, and directly
opposite.

N. B. — For the shaping of the Collar, see Diagram 70, for Gent's
Dressing Gown.

Lady's Loose Sacque Cloak.

[See Diagram 47.]

How to Draft the Back.

Rule 69. — Place the Back-Guide on the goods in the position
shown by Diagram, and draft in the same manner as for Back of
Tight- Waist, except at the measure across the Back, which should
be made 1 inch looser than for a Tight- Waist. Also, at the meas-
ure around-the- Waist, 2 inches should be added for fullness : re-
membering to measure by the inches on the Dart-rule.

DIAGRA.M47.

LADY'S LOOSE SACQUE CLOAK.

' • 13 Arm measure.

Back measure.

Waist line.

2 inches added to Waist measure.
8 Length.of Waist.

3
^

[77]

Explanation. — The Skirt of this garment is drafted by the same
rule as Lady's Polonaise, applying the measures given in the Dia-
gram.

N. B. — The upper part of the Back indicated by the 1-inch dotted
line (below the Neck), should be cut ojEF to fit the Neck at the
Front, and for the sewing on of the Collar.

Lady's Circular.

[See DiAGRAii 48.]

The measures used in drafting this garment consist of — first, the
Neck ; second, across the Back ; third, length down the center of
Back; and, fourth, length down the center of Front.

How to Draft the Back of Circular.

Rule 70. — Place the Back-Guide in the position indicated in
the Diagram, viz.; with the Center-of-Back edge of Guide placed
directly at the Fold-edge of goods, at the same time having the
Neck-edge slipped down 5 inches below the top; then dot at 12,
Back-Neck; also, at 13, for measure across the Back, dotting on
the upper line of measures for this purpose. Now change the po-
sition of the Guide, and * draw the line for Back-Neck. Next, place
the Guide in the following position; viz., with its upper Neck-
point resting at the Neck-point on the goods, at the same time
having the shoulder-edge resting on the dot made for Back-Meas-
ure ; viz., 13. Then draw a line on the edge of the shoulder from
the Neck-dot 12 to the figure 5, for Length, (printed on the shoul-
der-edge). Next, measure 1 inch straight across from the Back-Neck,
and make a dot; and from this point again measure 1 inch straight
up, and dot.

How to Draft the Front of Circular.

Rule 71. — Turn the Front-Guide wrong side up, and place it in
such position on the goods that the Upper-Neck measure, 12, tvill be
directly on and over the 1-inch dot last made, at the same time keep-
ing the Front-edge of the Guide on a parallel line with the edge
of the goods; then dot at 12, Front-Neck, and 12, Upper-Neck

HOOD FOR CIRCULAR.

,- — i,;;'"**^^^!:. r-~_

\
\
\

ro^ — »>

" 1

\ 1=3
\

\
\
\

Length. §^

<^ £dgeof Good«t.

1 —

Center of Back.

Length.

3oJ

Edge of Goods.

48.

DIAGRAM

LADY'S
CIRCULAR

[79]

The Front-Guide should be changed into its proper position, and
the Neck-curve-edge of the Guide placed directly up to and under
the dots last made for Neck at Front. A line should now be
drawn from 12, Upper-Neck, to 12, Front-Neck, as indicated in
Diagram.

Explanation. — The Plait on the Shoulder is shaped by drawing a
line on the Shoulder-edge of the Back-Guide from the Upper-Neck
dot 12, to the 5-inch dot on the terminus of the Shoulder-plait.

TJie length of the Circular and the curve at the bottom are obtained
in the following manner; viz.: Place the figure-1-end of the tape-
line on the Fold-edge of the Goods, 2 inches above the line of Back-
Neck (fastening it by pin or otherwise to the table) ; then wrap the
tape-line (at the distance of 30 inches from the upper end) around
a pencil, and while fully stretched, draw a line around from the
fold-edge to the Front. This gives the Curve for the bottom, and
the proper length.

Hood for Circular.

[See Diagram 49.]
How to Measure for Hood of Circniar.

First, measure with tape-line, beginning at the nape of the Neck,
passing over the crown of the head to the center of the forehead ;
second, measure from the left side of Ihe Neck, below the ear, to the
opposite side at the same point.

How to Draft the Neck-Curre of Circniar.

Rule 72. — First, measure down the Selvage-edge of goods 9
inches, and make a dot ; also, measure across the top of the goods
9 inches; then draft the Neck-curve with the tape-line stretched in
the manner described for drafting curve at the bottom of Circular,
using 9 inches instead of 30.

Explanation. — For length of Hood, make a dot 20 inches below
the 9-inch dot (measuring on the edge of Goods) ; then make a dot
12 inches above the 20-inch dot last made.

[80]

The Curve Jor the bottom of the Hood is shaped by the tape-line
in the manner previously described, placing the 1-inch end of tape-
line at the 12-inch dot last made and drawing a curve around the
l)ottom, with the tape-line stretched 12 inches, as shown in Dia-
gram 49.

N. B. — The upper side of the Hood, extending from the 12-inch
dot to the 9-inch dot at the toj), is shaped by the Side- form-Rule;
also, the dotted outside line, which is designed for facing.

Xj X: SI J5 O ZU X4.

Lady's Princess Bress.

With Revere Collar.

[See Diagkam 50.]
How to Draft the Front.

Rule 73. — Place the Front-Guide in the same position on the
Goods as shown by Diagram ; viz., 2 inches back from the edge ;
then draw a line at this distance the entire length of the Front, par-
allel with the Selvage-edge all the way down. Next, dot at the
measures given in the Diagram, in the same manner as when
drafting the Front of Tight- Waist.

Explanation. — The Side form is shaped from the inside of the sec-
ond Dart to the center of the Shoulder, as shown by Diagram.

The Darts are formed in the same manner as for Basque, except
the second ; which, in this garment, terminates at the 2-inch Gore-dot
(9 inches below the Waist-curve).

Tlie inside line of the second Dart (above the Waist) is shaped by
placing the Side-form-Rule in the position indicated in Diagram,

DIAGRAM 50.

PRINCESS DRESS;
With Revere Collar.

Top of

Ooods.

13 Arm measure.

•,9

•^

1 f

1 /

9
9

[fi

(»

Breasts

I^ength

at Front.

'40)4

Length

next Front

liOngth
at Side,

— - I

[81J

and drawing a curved line from dot A to dot B. The dotted line
extending from the |-incli dot (at the Waist-curve) to the 2-inch dot
at letter C, indicates the slojie of the Gore next Front, which should
be continued on the same angle to the bottom ; viz., 40 J inches.

The outside line of the second Dart extending from the B-dot on
the Waist-curve to letter C, (at the 2-inch Gore-dot), indicates a
continuous straight line to the bottom of Skirt, 40^ inches.

N. B. — This Skirt, when drafted in the manner above described,
will be composed of a Bias, and Straight-edge at the seam next
Front.

The Revere Collar is drafted in the manner following ; viz., cut
across, on the dotted line, fi^om the Selvage-edge to the dot located 6
inches below the Front-Neck; then turn over the goods on the
heavy line denoting the Collar-fold^ This being done, it is necessary
to re-draft the Shoulder-line by placing the Shoulder-part of the
Guide in the same position as at first, and draw a line from the
Neck-point to the top of Arm-curve, dotting at the length required.

The shape of the Revere Collar is obtained by placing the Side-
form-Rule in such position on the goods as will produce the partic-
ular shape desired. See Diagram.

The 2-inch dot at the Shoulder denotes the width of the Collar at
that part where it unites with the Collar of the Back.

Princess Dress, With Revere Collar

How to Draft the Back.

Rule 74. — The Back of this garment is drafted according to
Diagram 37 — Back of Lady's Polonaise, or Diagrams 44 and 45,
Miss' Polonaise — by applying the same rules for Gores and adapting
the measures of the Bade to correspond with tfiose of the Front.

Before commencing to draft the Back of this garment, it is neces-
sary to place the Neck-edge of the Guide 3 or 4 inches below the
top of the goods. Also, before drafting the line for Back-Shoulder,
the goods should be folded over downward, making the fold on the
line of the Back-Neck-point and the top of Arm-curve. This

[82]

being done, re-draft the Shoulder-line on the goods, and shape the
collar in the manner hereafter described.

The shape of the Revere Collar at Back is obtained by placing the
upper part of the Side-form-Rule on the Shoulder, 2 inches below the
Neck-point, and the lower part of Side-form-Rule resting at the
Center-of-Back, 2 or 3 inches below the center of the Neck, and drawr
ing a line on the rounded edge.

Caution. — Now trim out this line, being careful not to cut through
the goods underneath, otherwise it would spoil the Back of the
Dress.

Gent's Sacque Yoke Shirt.

[See Diagram 51.]
How to Draft the Back.

Rule 75. — For this garment draft by the following average
measures; viz.. First: Across the breast 18 inches; Second: Omit
the measure Around the Waist, and draw the line for Length of
Waist straight down from the Arm-point, the required length;
Third: Around the Arm, 16; Fourth: Length of Waist, 10 inches;
Fifth: Length up Center of Front, 16; Sixth: Around the
Neck, 14; Seventh: Length of Shoulder, 6 inches; Eighth: Length
of Skirt from Arm-point to the bottom, 25 inches.

The outline of this garment is drafted by the rules previously
given for Dress- Waist, and applying the above measures for this
purpose.

How to Shape the Back-Neck.

EuLE 76. — The Waist of this garment being drafted, then pro-
ceed by making a dot on the edge of Goods 2 inches above the 16-
inch dot. The Back-Neck is now shaped by the Neck-curve of the
Guide, drawing a line»(with the Guide in a reversed position) from
the 2-inch dot on the edge to the 14-inch dot of Upper-Neck.
This being done, make another dot 2 inches from the edge of the
Goods on the curve of Back-Neck. Then make a dot three-fourtJis of
an inch below the Q-inch dot, (at the terminus of the Shoulder). A
line should now be drawn across from the 2-inch dot {on the curve
of Neck) to the |-inch dot, below the end of Shoulder. Next, trim

DIAGRAM 51.

. 1% Arm.measure.

QENTrS SHIRT

[84]

out the Neck by cutting exactly ou the line of the Neck-curve and
Shoulder to l|-iuch dot below the top of Arm-curve.

The Goods should now be folded over on the line drawn from the
2-inch dot to the ^-inch dot, so that the Shoulder-edge of the Yoke
will meet at the dotted line indicated in the Diagram as the Yoke-
seam.

Explanation. — The Back of Arm-Size is shaped with the Side-form-
Eule, by drawing a line on the under-edge from the Shoulder to the
1-incli dot below the Arm-point.

How to Shape the Front of Shirt.

Rule 77. — First shape the Front Neck. This is done by making
a dot IJ inches below the 16-inch dot, indicating the length up
Front, and then drawing the curve designated in Diagram by the
dotted line.

Explanation. — This curve for Front-Neck is shaped, after the Yohe
is folded over, by the Neck-Curve of the Guide being placed in such
position as to unite with and form a continuous line with the curve
of the Yoke at Back-Neck, as shown by Diagram.

The dotted line in the Diagram (located at and forming the Yoke-
seam), is the terminus of the upper part of the Front of Shirt where
it unites with the Yoke.

The re-shaping of the Front- Arm- Size is done by cutting oflp 1
inch at the Arm-point (first drafted.

The Curved dotted line, denoting length of Waist, is shaped by
marking on the Curved-edge of the Dart-Rule, placing it in such
position as to produce the shape desired.

The curve and length of the Shirt at the Side are obtained by the
Skirt-Bule, the corners being rounded by the Side-form-Rule.

N. B. — In drawing the Arm-size of Shirt it is necessary to draw
the line from 16 Arm-measure to 13, near the Arm-point.

Diagram 53. — This represents a separate Yoke for Shirt, and is
drafted in the same manner as the Sacque-Yoke Shirt, with the fol-

[86]

lowing exceptions ; viz., the Shoulder part of the Back being ex-
tended 3 inches beyond the Arm-size of the Front Yoke, and then
gathered into a separate Yoke. The front of Shirt, for separate Yoke,
is drafted in the same manner as the front of Sacque-Yoke Shirt.

The letters A. B. in the Diagram indicate the Yoke-seam at Bach,
and the dotted line, commencing at the Neck-curve, denotes the fold.

Dress-Skirt, Without Train

[See Diagrams 54, 55 and 56.}
How to Draft the Front-Width.

RuiiE 78. — First, fold the Goods double; then measure across
the top 5 inches for Waist-line, and make a dot. The A-point of
the Skirt-Rule should now be placed at this dot, and the straight-
edge of the Eule parallel with the fold of goods, dotting at figure
2 for Gore, next Front ; then draft the line for length at the Side,
and at the center of Front, in the usual manner. r.

N. B. — The 1-inch dot on the fold-edge of goods (below the
Waist-line) denotes the curving of the Waist at Front.

How to Draft the Side and Back-Width

RuL.B 79. — Place the Goods in the position indicated by Diagram
55 ; then measure across the top 8 inches, for Waist-line, and make
a dot. Next, place the Skirt-Rule in the position previously de-
scribed for forming the Gore at the Side, and draft the remainder
of the skirt in the usual manner, being careful to use the figures
indicating the Lengths and Gores, printed on the Diagram.

N. B. — Diagram 56 represents one plain Width, folded at the
Center of Back, and is drafted by the figures indicating the meas-
ures, by the rule previously given.

Explanation. — This Skirt, when drafted, will measure 3 yards in
width at the bottom.

'^^r-

Told of Goods, DonlSl«,

Center of Back

Side.

Selvage edge.

IfulU of l>re»>N OoodM, Uoable.

[87]
Dress-Skirt.

With Train.

[See DiAaRAMS 57, 58, 59 and 60.]

Rule 80. — This Skirt is drafted by the same rule as given for
Skirt without train, with the exception of its having two gores on each
side, instead of one; being, also, longer at the seams and wider
at the bottom.

In all other respects it is drafted in the usual manner, by apply-
ing the figures on the Diagrams indicating the distances and lengths,
and the slope of the gores.

N. B. — This Skirt, when drafted by these measures, will be three
yards and three-quarters wide at the bottom, with train eight inches
in length.

Lady's Over-Skirt.

[See Diagrams 61, 62 and 63.]

Rule 81. — This Skirt is drafted in the same manner, and by the
same rule as Dress-Shirt without train, using the measures indi-
cating the width at the Waist, the curve at the Front and Side, the
slope of the gores, and the lengths of the seams.

Explanation.— The figures and letters in Diagram 63 represent
the spaces and distances for looping the skirt at the Back.

N. B. — For special directions on cutting, basting and making,
see Part 3.

C5 .

Fold of: Goods

Sonble.

Center oXJBack..

BACK.

Next Back.

Selvag<e edge

Skirt Rule

SIDE.
NEXT BAGK.

Si«lei> ^elvage. edge.

SIDE.
NEXT FRONT

Next^Center of Proiit

Selvage edge, of Goods

Skirt Rule

FRONJ.

TRAIN SKIRT.

Center of Front.

Fold.of Goods

Double.

'H Fold of Goods.

Doable.

Center^of Back. Leugth., ^ ]

fc.

.-^

BACK- WIDTH.

Tiength. ^|

Pleats.

Side.

Center of 'Front.

Length, to

Fold of Goods. Doable.

[90]

XLi Z3 19 )9 O 3>J 1

Lady's Sacque Chemise.

TSee Diagram 64.]
How to Braft the Front and Back Together,

Rule 82. — First, fold the Goods double, and again crosswise;
then proceed to mark oif the following distances ; viz., First : Meas-
ure down the edge of the fold 12 inches, and make a dot. Second:
From this dot draw a line straight across 9 inches (for bottom of
Waist). Third: Measure from the fold-edge across the top of the
goods 12 inches, and dot. Fourth: From this dot draw a straight
line down 4 inches for Arm-size. Fifth: From the 4-inch dot
at the end of the Arm-size-line draw a line for Length of Waist
to the 9-inch dot at the Waist-line-terminus.

Explanation. — The curves of the Front and Back-Neck are drafted
by the dots and figures printed on the Diagram, and shaped by the
curve of the Side-form-Rule ; the upper neck-dot being 3 inches
from the fold-edge of the center.

N. B. — The Skirt is drafted in the usual manner, using the
measures indicating the slope of the gore and the lengths of the
seams.

Lady's Yoke Chemise.

[See Diagkam C5,]
How to Draft the Front.

Rule 83. — Place the Front-Guide on the Goods in the position
shown by Diagram; viz., with the Front edge slipped 1 inch over
the fold of the goods at the Center-of-Front; then proceed to
draft in the same manner as for Tight-Waist.

Explanation. — The dotted curved line at the upper part of the
Waist indicates the part to be cut off, and is shaped by the Si(Je-

£dg:e. of Goods.

Length, ^^j^

1 inch.

Edg'e of Goods.

•

Edge of Guide.

i£>

lU LU

D CO

<y 5

o ^

1^ —

< T

II to

Length, "^i

£dge of Goods.

[92]

form-Rule being placed at the distance of 3 or 4 inches below the
Neck, and IJ inches above the end of the Shoulder-line.

The line under the Yohe is also shaped by the Side-form-Rule
being placed at the figures indicated ; viz., 4 or 5 inches above the
Waist-line, and 3 inches below the Shoulder, (on the Arm-curve),
extending the line 3 inches beyond, for fullness (in the manner pre-
viously described for Yoke-Waists).

N. B. — This fullness is gathered into the Yoke.

The remainder of the Front is drafted as shown in the Diagram,
by making the Length-of- Waist line straight down from the 3-inch
dot above the Arm-point to the Waist-line, and shaping the Skirt in
the manner previously described.

Lady's Yoke-Chemise.

[See Diagram 66.]
How to Draft the Back.

Rule 84. — Place the Back-Guide on the Selvage-edge of goods,
and draft the Back in the same manner as described for the Back
of Tight-Waist, using the measures given in the Diagram.

Explanation. — The figure 5, printed on the edge of Goods (below
the Neck), denotes distance from the Neck, and the figure 2 denotes
distance from the 5-inch dot located on the edge above. The 1|-
inch dot on the Shoulder denotes distance above the top of Arm-
size, and the 3-inch dot beyond the center of Arm-curve denotes
fullness.

The forming of the Yoke is done by placing the Side-form llule at
the points indicated by the figures, and drawing a line according to
the shape desired.

N. B. — Tlie line for Length of Waist is made straight down to the
Waist-line.

The Skirt is drafted in the usual manner.

[93]
Corset Cover.

[See Diagbam 67.]
How to Draft the Front.

Rule 85. — This garment is drafted by the same rule as previ-
ously given for Miss' Basque^ with the following exception; viz.,
it being open at the Front and low at the Neck.

Explanation. — The measures for this Waist should be taken
tighter than usual, as it is designed to be worn under the Dress.

The Low-Nech is drafted by the measures and shaped as shown
by the Diagram.

How to Draft the Back.

[See Diagbam 68.]

Rule 86. — The Back of Corset-Cover is drafted by the Rule for
Miss' Basque, excepting that there is a seam down the center of
Back, indicated by the curved line.

The line for Low-Neck is formed in the usual manner.

Lady*s Drawers.

[See Diagbam 69.]
How to Draft the Back.

Rule 87. — For this garment take the following measures; First:
Around the "Waist, 24 inches; Second: From the bottom of the
Waist down the Side, 36 inches; Third: Around the bottom of the
Leg, 20 inches.

Rule 88. — Place the fold-edge of Goods in the position indi-
cated by the Diagram ; then proceed in the following manner ; viz..
First: Measure down the fold-edge of Goods 2| inches from the
top, and make a dot. (This gives the slope at the Waist). Second:
From this 2|-inch dot measure down the fold-edge 36 inches, and
dot. (This gives the length at the Side). Third: From the 36-
inch dot measure 10 inches straight across. (This gives half the

Curved .l}«e-.

Kdge of Good!*.

Skirt. \ Rule,
\

^ttiki

L/enpfth.

Ed^e of Goods.

[95]

width of the Leg of the Drawers at the bottom). Fourth: Meas-
ure from the 2|-inch dot first made, sloping upward to the top of
the Goods, 12 inches, and dot. (This gives half the width of the
measure around the Waist). Fifth: Measure from the 2|-inch dot
downward, on the fold-edge, 14 inches, and dot. (This distance is
determined by adding 2 inches to one-third of the length, and
forms the basis for the line across to the Seat). Sixth: From the
14-inch dot measure straight across 15 inches, and dot. (This gives
the line of the Seat, and should be 3 inches wider than at the
Waist).

The outline of the Drawers is obtained as follows : First : Draw
a line from the 2 J-inch dot to the 12-inch dot at the Front ; See-
ond: Draw a line from the 12-inch dot to the 15-inch dot at the
Seat; Third: Draw a line from the 15-inch dot downward to the
10-inch dot, curving it slightly with the curved edge of Skirt-Rule.
(This forms the line for inside seam of the Leg of the Drawers).

This completes the garment, when the Front and Back are drafted
alike.

Explanation. — The Front of the Drawers at the top may be
drafted narrower and shorter, if preferred, by shaping according to
the under dotted line, marked Front, 10 inches. See Diagram.

xa x: js 19 o so- lo,

Gent's Dressing Gown.

[See Diagrams 70 and 71.]
How to Draft the Front.

E.ULE 89. — Place the Front-Guide on the Goods in the position
indicated by the Diagram, then draft by the rules previously given

DIAGRAM 70.

DIAGRAM 71.

GENT'S DRESSING GOWN.

''>P^^^---^

r — \^*

i^y/ ^^^17

i--\

)' !/

2 FRONT. VZ^

Center of Back.

1.14 j

o^ ^^ '

•^ Pocket.

■Waist. 30 •

»40

Arovind

— * lU

Waist Tine. I

ft
©

Waist.
• 30

Waist line.

Pocket.

I f

'SKIRT. \

SKIRT.

3' ^\

3 ?\

§
•8-

18 ^

1
9-

COLLAR.

1
1

}

Length 9

ihelxes.

>a*;»i».-

[97]

for Dress- Waist, except to add hut one Dart to the Waist-measure;
also, to draft the Waist-line straight across, instead of curved.

Tlie Side-length, and also the bottom of Skirt, are shaped by the
curved-edge of Skirt-Rule.

Tlie width of the Shirt at the bottom should be 1 or 2 inches more
than at the Waist-line.

The Collar for Dressing-Gown is shaped in the manner described
for Collar of Lady's Sacque-Cloak.

* This garment can be drafted with double-breast, if preferred, by
observing the rule for front of Lady's Sacque-Cloak.

The dotted line (extending from the 5-inch dot below the Front-
Neck to the 1-iuch dot on the Shoulder), denotes the line for the
fold of Collar at Front.

Tlie Collar should be curved, to fit the Neck at Front, from the
14-incli dot around to the center of Back, where it is joined with a
sloping seam. See Diagram for collar.

N. B. — The upper portion of the Neck {from the 1-inch dot
at the Slioulder to that part of the curve where it approaches the
nearest to the dotted line), should be cut off".

How to Draft the Back of Dressing Gown.

[See Diagram 71.]

Rule 90. — Place the Back-Guide on the fold-edge of Goods, in
the manner described for Back of Dress- Waist, and draft by the
measures given in the Diagram.

The line for length of Skirt should extend almost straight down
from the Arm-point.

The 1-inch dotted line, located below the Back-Neck, indicates
the part designed to be cut off for the fold of Collar.

For drafting Sleeve, see Diagram 74.

[98]
Boy's Coat.

[See Diagram 72.]
How to Draft the Front.

HuLE 91. — Place the Front-edge of the Guide, directly on the edge
of goods, and proceed to draft by the measures given in the Dia-
gram in the same manner, as for Front of Dress-Waist.

Explanation. — In drafting the line for the bottom of Waist, the
straight-edge of the Skirt-Rule should be used (instead of the bottom
edge of Dress-Guide); this line requiring to be straight across from
the terminus of the length of Waist.

The Skirt-line (of the Front, at the Side) is drafted slightly curving;
the width at the bottom, being 1 inch more than at the Waist-line.

The Curve at the Front part, or lower corner of the Skirt (indicated
by the dotted line), is made by the Side-form-Rnle.

The 1 inch for lap, indicated by the line running down from dot
12, Front-Neck, is made after the outline of the Waist is drafted, and
marked off from the front part of the Waist, instead of being
allowed additional, as in Dress- Waist.

The dotted line, extending from 5 inches below the Neck, to the 1-
inch dot on the Shoulder-line (below the upper Neck-point), denotes
the line for fold of Collar.

That portion of the upper-Nech above the point where the curve
and the line for fold unite, should be cut away for the purpose of
adapting the Neck to the shape of the Collar.

The Buttons should be placed on the space for lap, 2 inches
apart.

The length of the pockets should be 4 or 5 inches, and may be
shaped to suit the prevailing style.

N. B. — If a double-breast is desired for this garment, then draft
by the rule given for this purpose. See Diagram of Lady's Sacque-
Qoak.

s?t>

> < UJ

O O uj

m O -J

05
V

§
t-i

~^\

-*<

ft
O

\ o

\ a

^'^

V '{^^

-"oX \P

•A '

—

Length.

£d^e of Goods.

^^^

"S is

1 ;a

^ ^

'3 o

o
o

CO \^^

2 22

>■

/^"^-

_• •

s: ^

1 .

■"^

; 0

■

2fl

1
1

i—i

Edge

of Goods.

^•

be 03

-1*

—

■

Sv N

"-\v -* ^

)

."^

C-"*

~^./\^ — « .-1

• «^

f>«

>•

*-^ii5 -y

^
^

•»j

1=^

/<r-

<»

^^^

L ;■■-

1 inch for lap

1--

.-'

2 in

Edge of Goods.

[100]
Boy's Coat.

[See Diagram 73.]

How to Draft the Back.

Rule 92. — Place the Back-Guide with its edge directly on the
fold of goods, (keeping it parallel, its entire length) ; then dot in
the same manner as for Back of Dress- Waist, using the meas-
ures on the Diagram.

Explanation. — The Skirt is drafted by drawing a line straight
down to the measure indicating the length.

The width of the Skirt at the bottom should be the same as at
the waist-line.

The dotted line below the Neck indicates the part to be cut away to
suit the Collar at Front. •

N. B. — For drafting collar, see Diagram for Gent^sGressing-Down.
Boy's Coat Sleeve,

[See Diagram 74.]

Rule 93. — This is drafted by measuring on the goods as indi-
cated in Diagram.

Explanation. — The 2|-inch dot to the 7-inch dot, denotes the
slope of the upper part of the Sleeve, this being one-hal f the size of
the arm at the top. The 16-inch dot denotes the length of the in-
side seam of sleeve, and the 4-inch, dot one-half the size around,
the wrist. (This measure should be taken loose, so as to admit of
easy passage for the hand). The l|-inch dot indicates the increased
length given to the outer part of the Sleeve. The 8-inch dot denotes
one-half the length of the Sleeve. (From this point the width of
sleeve at the elbow is obtained). The 7-inch dot denotes a point
directly opposite to the 8-inch dot, for the width of the sleeve
at the elbow. This can be varied, making it wider or narrower, as
fashion or taste may indicate.

The outline of the sleeve, and the curves at the top are made by
the Sidc-form-Rule, adjusting its position to obtain the shape de-
sired. See Rule for drafting Lady's Coat Sleeve.

[101]

The dotted line in diagram (extending from the 2|^-inch dot to the
7-inch dot) indicates the curve for the under part of Sleeve at the
top.

N. B. — I7ie Sleeve /or Gent's Dressing Gown is drafted by this
rule, applying larger measures.

Gent's Tight Pants.

[See Diagrams 75 and 76.]

Take the following measures : First, around the Waist 36 inches;
second, the length from the Waist down the Side-seam to the bot"
torn, 39 inches; third, width across the front of the bottom.

How to Draft the Front,

Rule 94. — Now proceed to mark off and make dots on the goods
as follows: First, measure straight across the top 9 inches (this
number denotes one-fourth of the Waist-measure) ; second, measure
straight down the edge of goods 39 inches (this gives the length at
the Side) ; third, measure across the bottom 7 inches (this denotes
the width of the front part of pants at the bottom); fourth, meo&xxve
from the Waist, down the edge, 13 inches (this number represents
one-third of the measure for Side-length) ; it also forms the basis
for determining the proper location of the line across to the Fly.

The outline of the Front is drafted in the manner followinsr :
Beginning at the 13-inch dot last made, draw a line 12 inches
straight across to the point, denoting the termimus of the Fly.

The width of this part of the Front of pants should be 3 inches
greater than at the line for Waist-band.

A line should next be drawn across the bottom, from the 39-inch
dot to the 7-inch dot. The Waist-line should now be extended 3
inches beyond the 9-inch dot first made (this gives the 12-inch dot
indicated in the Diagram). Next, draw a straight line from the
12-inch dot at the Waist to the 12-inch dot at the point of the Fly,
and from thence downward to the 7-inch dot at the bottom. This
last line is curved slightly by the Skirt-Rule.

This completes the ovilin^ of the Front.

£dge of e«ods.

■*

•a

^^.^-^s^^^^

^^^^

. _.— ""C-^ •>*»

c>-

^
<
^
^
^

2
1

1« Side,

Side.

Length.

§?

IBdge of Goods.

5?t

/GEN
PAN-

Fly.

^^^

xfSi

-r

Front.

—

"■ J

isi,

1 -i-ii

1 05

IL.

=:)

t:!

-?1- «

Side,

Side.

Lenorth.

£dgr« of Goods.

[ 103 ]

Explanation. — The dotted line extending from the 6-inch dot at
Side, to the 1-inch dot at the "Waist, denotes the part cutoff for the
Pocket. The dotted line extending from the 1-inch dot at the
Waist, to the J-inch dot, indicates the waist-line re-shaped, and the
proper slope for the top of the Front. The dotted line marked
Front, denotes the center of the Pants, and is shaped by drawing a
line from the end of waist-line, to the line running crosswise. The
dotted curved line, extending from the 2-inch to the 12-inch dot, in-
dicates the proper shape for that part of the Front.

The curve at bottom of Pants is made by the curved edge of the
Dart-rule.

The inside line for seam (extending from the fly to the bottom)
should be drawn by the curve-edge of Sldrt-Kule.

Allow one-half inch for all seams.

Diagram 76. This represents the Back of Gent's Pants, and is
drafted in the same manner as the Front of Pants, by applying the
measures printed on the Diagram.

Explanation. — The 3-inch dot on the edge of Goods, at the Side,
denotes the slope of the Waist at Back. In drafting the Side-
length down the edge of goods, the measure should commence at
the 3-inch dot. In all other respects, draft in the manner previously
described for Front of Pants.

Boy's Loose Pants,

' [Skk Diagrams 77 and 78.]
Front and Eack.

These are drafted by the same rule as Gent's Pants— except
using smaller measures, and observing the differences indicated by
Diagrams.

[104]

PART THIRD.

CONSISTING OP

PRACTICAL DIRECTIONS

CUTTING, FITTING, BASTING, ETC.,
LADIES^ AND CHILDREN'S DRESS SUITS.

ALSO, BUaOKSTIONS ON THE ADAPTATION OF STYLES, SELECTION

OF DRESS-MATERIALS, ETC., TOQETnER WITn A VOCAD-

ULART OF TECUNICAL WORDS AND PHRASES

PECULIAR TO DEE89, JCTO

The Quantity op Material, Required for a suit, and how
to cut it. — Perhaps the question, " How much goods shall I got for
my dress?'' is asked by ladies more frequently than any other.
And, as many persons, when making purchases, have but a slight
conception of the quantity of material required, wo propose to
furnish such information as will aid their efforts in this direction.
For example, a lady wishes a black Alpaca, cut in the prevalent
mode; viz., basque, ovcrskirt and underskirt, of walking length,

[105]

and handsomely trimmed; she will require 18 yards of material,
(standard width, 28 inches) ; If yards of best drab drilling, for
basque lining; or, 2| yards for basque and sleeves; 6 yard* of
drab paper muslin for skirt linings ; 1 yard of black muslin for
facings; 1 skirt braid; 3 spools of sewing silk (100 yards each),
2 letter A, for hemming ruffles, and one of letter B, for stiching
basque and sewing on buttons; 1 spool of black cotton, (No. 70 or
80), and 1, of white basting cotton, (No. 30 or 40); 1 or 2 whale-
bones, (thin and flexible); 10 yards of black cable cord; 6 small
hooks and eyes for the front, and 2 of larger size for the skirt
bands; 1 yard of rubber braid, for looping purposes, and 15 or 18
buttons (from J to f of an inch in diameter).

How TO Draft the Lining for the Front of JBasque. —

Before commencing to draft on the goods it is advisable to have all
the material ready, together with the Dress-Guide, Skirt-Rule, tape-
line for measuring, scissors, leadpencil, a piece of French-chalk, and
table, which last should be of sufficient dimensions to cut the entire
skirt of a dress. Wlien a strong light is an object, then place the
table near a window, in such position that the light may fall upon
it obliquely from the left. The drilling should now be arranged
upon the table with the selvages together, and in front. Then
place the Dress-Guide thereon, in proper position for drafting. (See
Diagram 25). If the drilling is not of sufficient width to cut the
fronts double, a piece of paper may be pinned upon the fold of the
lining (extending it from the arm-point downward), then draw the
line, on the paper, to the bottom of the waist.

N. B. — This paper piece should afterwards be cut out and re-
placed by a piece of the lining (of the same size and shape) saved
from cutting the backs. When the outline is drafted, and the darts
marked, then cut out the fronts, allowing for seams, as shown in Dia-
gram 9. An impression of the darts should now be made on the
opposite side of the lining, by placing the left hand underneath, at

[106]

the same time holding the goods with the thumb and finger of the
right hand, and creasing along the dart-lines of the upper side. The
darts should now be re-drafted, with the "Rule" laid in a reversed
position, as a slight difference exists in the curve of the sides.

How TO "Draft the Lining for the Back of Basque. — Turn
the lining over so as to bring the fold in front, then place the neck of
the Guide up to the top of the goods, and the back-edge of the Guide
on a line with the edge of the fold, as shown in Diagram 26. To
save material, it is advisable, before commencing to draft, to pin a
piece of paper on the lining of sufficient dimensions to cut the side-
form piece entire, extending it up to the middle of the arm-size,
and down to the bottom of the Guide. After the outline of the
Back is drafted and cut out, then separate the side-form section,
marked A, (previously drafted on the paper), from the central por-
tion of the Back, and place it upon the lining, in the position shown
by side-form B, Diagram 27; viz., with that part of the side-form
next Back moved up dose to the selvage of the lining.

Explanation. — The paper side-form A, previously referred to,
should not be placed directly at the top of the lining, but at a suf-
ficient distance below, to allow of the waist and skirt being cut in one
piece. If cut in this manner, a saving of an irregular-shaped piece
of lining will be effected sufficient for piecing out the fronts. (For
the position of the paper side-form see Dijgram 27)

N. B. — The seams should now be creased in the usual manner.

IIow to Cut the Outside foe the Front of Basque. — Spread
the material singly, upon the table, folding it over crosswise toward
the right hand, so that when doubled it will be of the same length
as the front of the lining.

[107]

Explanation. — The position of the goods upon the table, (when
cutting), should be as follows; viz., the end (or tlmt portion to be cut
first) placed at the left hand side, and the bulk of the material on
a chair at the right.

The Lining for the front of the basque being already cut should
now be placed upon the goods, with the selvages together. Next,
proceed to cut the material, carefully following the edge of the
lining.

N. B. — An irregular shaped piece will be left after cutting the
fronts, of sufficient size for the upper portions of both sleeves.

Remarks. — The erroneous custom practiced by many ladies (from
a mistaken notion of economy) of cutting the fronts on the double
of the fold, necessitates, in most instances, piecing under the arm,
except in very wide material, such as cashmere, etc. As a rule,
cutting the fronts of a basque double, for a lady, out of any goods
of less width than 30 inches, will require piecing; and if the seam
does not produce wrinkles (which it is almost certain to do), the
strain upon it will eventually cause the parts to separate; thus
involving the necessity of re-stitching, perhaps, before the garment
is half worn.

How TO Cut the Outside, for the Back op Basque. — Place
the lining for the central portion of the Back, u}X)n the goods (In
proper position with reference to the grain), and the straight edges
of the side-form pieces, (designed to join at the back), on a line
with the selvage of the goods ; then cut the goods, carefully follow-
ing the edges of the lining. By this arrangement, the back and
side-form pieces, can generally be cut out of one width.

How TO Cut the Lining fob the Skirt. — First, place the
lining in the following position ; viz., with tJie end or upper part to
the left, and the fold directly in front. The front width should be

[108]

cut first; then, turning the lining over, so that the selvage will be
in front, cut the hides next, and then the back (according to Dia-
grams 54 55 and 56, each width being cut double).

N. B. — The sides, near the bottom of the skirt, may be pieced
with portions of the remnants saved from cutting the gores.

It is advisable to extend the line for length, 2 or 3 inches below the
terminus of the measures. (This allows for turning down at the top
and for seams). Now cut out the widths, carefully following the
lines.

How TO Cut the Outside for the Skirt. — Place the goods in
position ; viz., with the fold in front, and the top or upper end at the
left-hand side.

How to Arrange the Lining upon the Goods to Econo-
mize Material, in Cutting the Outside for the Front
AND Side-Widths. — First, arrange the lining of the front width
on the goods, in the following reversed position; viz., with the
bottom of the skirt placed at the left hand and the fold of the goods,
and the fold of the lining, laid evenly together, at the center of the
front. The selvages of the side-widths should next be placed
exactly even, with the selvages of the goods, having the upper part
of the lining slipped as high toward the top as the width of goods
will permit.

In Alpaca or other material, where no difference of figure or
design exists, a saving of some inches may be effected by observing
this rule. However, if the goods have what is familiarly called
an "up and down," then all parts of the garment should be cut in
the same direction of the figure. Lastly, cut the width for tJie back
by placing the lining upon the goods, and cutting it the required
length.

[109]

Remarh. — The lining, being usually the widest, should be trim-
med to suit the width of the goods.

How TO Cut the Overskirt. — First, turn the goods wrong
side out, 60 that no pencil marks will be visible upon the outside.
This being done, proceed to draft the widths in the following order:
First, the front; second, the side; and, third, the back, following
the measures and directions given under Diagrams 54, 55, 56 to 63,
inclusive.

Remarks. — The surplus pieces left, from cutting the overskirt,
will generally be sufficient for the under portions of the sleeves.
An estimate of the quantity of material used thus far in the con-
struction of the above suit, gives the following results; viz., for
the fronts of basque, 60 inches ; for the back, 30 inches ; total, 90
inches. For the underskirt; viz., front, 43 inches; side widths
44 inches; back, 45 inches; total, 132 inches. This computa-
tion is based upon the skirt lengths given in the Diagrams, allow-
ing 3 inches, additional, for turning down at the top, and foi
the seams. For the overskirt; viz-, front width, 36 inches; side
widths, 37 inches; and the back, 45 inches; total, 113 inches.
Adding these several sums total together; viz., basque 90 inches,
underskirt 132 inches, overskirt 113 inches, gives the aggregate
result of 340 inches; which, being divided by 36, (the number of
inches in a yard) is equivalent to 9 yards and 16 inches ; and, sub-
tracting this from the original amount, (18 yards) leaves a remainder
of 8 yards and 20 inches for trimming.

Remarks. — As ladies frequently express surprise at the immense
amount of material required for trimming, we are induced to give
the following calculation in detail :

How TO Estimate the Amount of Material in Lengths
FOR Trimming the Skirt ; viz., with knife plaitings, bands and
cords. — Commencing with the underskirt, for example, first measure

[110]

across the bottom of the front width 17 inches, the side width
25 inches, and the back width 14 inches ; total 5G inches, or half
the width of the skirt, each width being measured double. This
last amount; viz., 56 inches, multiplied by 2, gives 112 inches;
and this, divided by 36 (the number of inches in a yard), gives 3
yards and 4 inches, the entire circumference of the skirt.

Remarh. — In making the estimates for knife or side plaitings, it
must be remembered that 3 yards of the material, already hemmed
and prepared, make only 1 yard when plaited.

To Find the Number of Strips Required to go Once
Around the Skirt. — Rule: Divide the number of inches con-
tained in the circumference of the Skirt by the number of inches in
the width of the material. For example: 112 inches being the cir-
cumference, this, divided by 28 inches, (the width), gives 4 (the
number of strips required; to go once around the skirt) ; and, again,
this number (4), multiplied by 3, gives 12, the number of strips
required for one rou) of plaiting.

How to Find the Quantity of Material for One Row
OF Plaiting. — Rule : Multiply the number of inches contained in
the depth of the strips by the number of strips required for one
row of plaiting. For example: Supposing 12 to be the number of
strips, and 6 inches the depth, these, multiplied together, gives 72
inches, and this, divided by 36, gives 2 yards, the quantity required
for one row of plaiting.

Remark. — For the dress-suit already described, the estimate is
based upon two rows of plaiting for the underskirt, each row being 6
inches in depth, making 4 yards, the amount required for two rows.

How to Calculate the Plaiting for the Overskirt. —

Suppose the circumference of the skirt to be 112 inches, the num-
ber of strips 12 (as before estimated), and the depth of the trimming

[Ill]

4 inches, then multiply the last two numbers together. This will
give the quantity of material required for one row of plaiting; viz.,
48 inches, or, 1 yard and 12 inches.

How TO Calculate the Plaiting foe Basque and Sleeves. —
For example: If the parts of the basque and sleeves requiring to
be trimmed) should measure 140 inches, then divide this number
by 28 inches (the width of the material), which gives 5 (the num-
ber of strips for once around), and this, multiplied by 3, gives 15,
(the number of stnps for one row of plaiting). Then, again, this
last number (15), being multiplied by 2 inches (the depth of the
strip), gives the amount of material for basque and sleeves; viz.;
30 inches.

In summing up the several estimates above given for plaiting, we
have as follows: 4 yards for the underskirt, 1 yard and 12 inches
for the overskirt, and 30 inches for the basque and sleeves; or the
sum total of 6 yards and 6 inches for the entire suit.. This, being
deducted from 8 yards and 20 inches, leaves a remainder of 2 yards
and 14 inches.

How to Cut the Biasses for Bands and Coeds. — Spread out
the remainder of the goods singly upon the table, folding the selvage
over to the raw-edge. This makes a true bias. The goods should
be folded over and over, making a piece 4 or 5 inches in width.

The left-hand portion of this piece may now be cut oif straight
across on a true line with the fold-edge, about 18 inches from the
point. This piece, when cut off and unrolled, will be of a trian-
gular-shape, and can be utilized for facings, etc. Next, place the
skirt-rule upon the goods with its straight-edge even with the fold,
and the A-corner moved up to the top, and proceed to mark on the
goods for the bands, making them 2 inches in depth, dotting at the
inches on the skirt- rule for this purpose. Estimating for the entire
Suit, 9 strips, 2 inches each in depth; viz., 6 for the under-

[112]

skirt, and 3 for the overskirt; total, 18 inches. Cordings for
underskirt will require 9 strips, 1 inch in depth ; total, 9 inches.
Bands for basque, 3 strips, each 1 inch in depth; total, 3 inches.
And the cordings for basque, 6 strips, each 1 inch in depth;
total, 6 inches. These, added together, give the aggregate total of
3G inches on the bias, or 48 inches on the length or straight way of
the goods. This amount being deducted from the 2 yards and 14
inches, leaves a remainder of 1 yard and 2 inches, in two pieces
of triangular shape, which, by the rule of economy, may be con-
verted into pockets, cuffs, facings, etc

It would he well for pupils to prove the result of the above calcu-
lation by actual experiment, which can easily be done by substitut-
ing thin manilla paper for the material, and cutting it into strips
of the same width as the dress-goods, and measuring by the inches
on the miniature skirt-rule.

N. B. — These strips should be pasted together until a suf-
ficient length is obtained to represent the requisite amount of ma-
terial in miniature for the entire suit.

Now, proceed as if it were the material in reality, observing care-
fully the instructions given in the above chapter. The result will
well pay for the trouble of the experiment.

Ladies frequently are at a loss to estimate the amount of goods re-
quired for cutting a certain kind of garment; and, in expensive
material, such as velvet and silk, a dollar or two may easily be
saved by a little calculation. To illustrate : A lady wishes a velvet
polonaise: she has been told that G or 7 yards will be sufficient;
but as there is no standard width for velvet (except in Pouson's and
the best Lyon's brand), this is no criterion by which to bo governed.
The only correct and safe method of proccedure, in such a case, is
to ascertain the width of the goods selected, and, before pur-
chasing, take paper, and cutting it the same width, measure off the
supposed number of yards; then, with other paper, cut a pattcru,

[113]

and, placing it upon the paper representing the dress-goods, measure
the number of yards required, making the calculation by the
miniature Dress-Guide and Skirt-Rule.

A Certain Rule to Prevent Mistakes in Cutting when

A DiPFEREKCE IN FiGURE OR IN THE SiDES OF THE MATERIAL

Exists. — Spread out the goods upon a table, with the upper part
of the figure, and the upper portion of the garment toward the left
and cut every piece double, when the width of the goods will
permit; but, if cutting singly, as is often the case with sleeves and
side-gores for skirts, be careful that the right sides of the goods are
placed together ; and so with the under part of sleeves ; observing
also the same rule when cutting the side-widths for skirt, when not
cut double.

Cutting Goods on the Bias. — Many ladles think because
they purchase velvet, silk, etc., cut on the bias, that it will go
much farther than if cut upon the straight; the fact is, there is no
difference, except that when the end or ends are bias to begin with,
there is no waste, as there would be if a corner had to be cut off be-
fore commencing. Bias strips, cut from a given width of cloth, will
be one-third longer than if cut ujjon the straight; but there will be
less strips. In the same proportion as the strips are lengthed, will
the number be lessened. To illustrate: Take a yard of trimming
silk of a certain width (viz., 30 inches), — that has been cut upon
the bias at both ends, and fold it over and over until the whole yard
has been made into one bias strip 4 or 5 inches in width, conveni-
ent for cutting. Now, measure the length of the goods thus folded.
This will be about 26 inches; but, in cutting off the strips, each
one will measure 44 inches in length — one yard on the straight mak-
ing only 26 inches on the bias.

[114]

Dress-Linings. — Modistes are unanimous upon one subject;
viz., that, of all linings for waists and basques, silk is preferable,
from the fact that it does not stretch, but adapts itself closely to the
contour of the figure. Next to silk comes the best quality of what
is termed satin-jean, which is in reality nothing more than a supe-
rior grade of drilling. Linen, holland and silesia are also used,
and black percale for grenadines and hernanis' ; but drilling is gen-
erally preferred to any other material for cheap suits.

On Basting. — Before commencing to baste, have ready a low
chair, lap-board, needles (No. 7 sharps), and a spool of basting cot-
ton (Nos. 30 to 50).

How TO Baste a Basque. — If any piecing of the lining is neces-
sary it should be done before commencing to baste, by laying the
edges one over the other before stitching, thus making a smooth,
flat surface, which will not be the case, if seamed in the usual man-
ner. Place the linings of the fronts upon the goods, or "out-
side," and acting upon the supposition that the darts have been
properly re-drafted on the corresponding side of the lining, seams
creased, etc., fasten the lining to the outside by carefully bast-
ing all around the edges, commencing with the fronts ; next baste
down the center and outside of each dart; then folding from the
center, bring the sides together, basting exactly on the lines deline-
ating the darts, remembering that the least discrepancy at this part
of the garment will be perceptible. When a seam occurs at the cen-
ter of the back, join the parts accurately together, commencing at the
bottom of the waist and basting upward to the neck, observing (if
the material is in stripes or plaids) that each part is carefully
matched. The Side-forms should now be basted to the back, com-
mencing at the bottom of the waist, taking short stitches, and bast-
ing one-third of an inch from the edge, the bias edges a little fuller,
they having a tendency to stretch.

N. B. — The seams should now be trimmed evenly, all around.

[11?]

Finally, baste the fronts and backs together in the following
order; First, the seam of the shoulder, commencing at the point of
the neck and basting downward, at the same time stretching the
front so as to prevent wrinkles.

Remark. — When a bias and straight edge is brought together in
any part of the garment, the bias edge should be held slightly full;
otherwise the straight side, when stitched, will show wrinkles;
Second, baste the seams at the side, (under the arm) commencing at
the arm-point, and basting downward ; Third, face the center of the
front edges, curving the right side as in Diagram 31. But if a
hem is preferred, then turn over 1 or IJ inches for this purpose,
facing the left side, and placing the buttons 1 inch from the edge,
and the button holes as close to the edge as possible.

Remark. — Ladies with large busts usually prefer both sides curved,
and in this case the buttons are placed along the curve a sufficient
distance from the edge to prevent the fronts from spreading. But-
tons J an inch in diameter should be spaced 1 or IJ inches apart;
but if three-fourths of an inch in diameter, then If or If of an
inch may be allowed, and so on in the same ratio for different sizes.
For very corpulent ladies the buttons must be placed closer to-
gether, the strain upon the edges being much greater. Button-
holes may be either worked or bound. If worked, C twist should
be used, except for very fine material; but if not neatly done,
binding will give a better effect.

Caution. — Each separate part of the garment should now be com-
pared with the measures taken from the person; and, if they agree
in every particular, the darts, shoulder and side-form seams may be
stitched; but if any discrepancy is apparent, it is better to attend
to the fitting first. However, in any event, leave the under-arm-
seams open, so that, if any change is necessary, it may be affected
the more easily. This being done, proceed to fit the dress.

[116 ]

As much depends upon the underclothing, corset, and other appen-
dages, a word of advice will be in order. An ill-fitting corset ia
certain to produce a worse fitting dress. The bands of the skirt,
tornure, etc., should be placed low down on the waist, at the same
time divesting the undergarments of all wrinkles.

Remark. — Ladies, to economize, will sometimes piece the lining
crosswise at the front or back of the dress, and sometimes both ; but
this is almost sure to be attended with annoyance in fitting. Any-
thing that prevents the outside from laying smoothly and evenly
upon the surface will detract from the general effect. In placing
the garment upon the form much depends on the manner in which
it is put on. The correct way is to examine and see that the pad-
ding (if any is used) is in its proper place, the shoulder-seams laid
.forward, the darts turned toward the back, the neck-curve stretched
(by gently manipulating it with the fingers), the under-arm-seam
laid toward the back, and the dress at the neck properly adjusted by
pulling up at the back ; then commence at the bottom of the waist
and button upward to the neck, arranging the breasts meanwhile
so that they will fall gracefully over the form. Next, button from
the waist downward to the terminus of the skirt. This being done,
and all the necessary precautions having been strictly observed, and
the desired result not yet obtained, analyze the matter.

Defects in Cutting, and their Remedies. — If wrinkles
should appear at the shoulder seam, the stretching of the front has
been neglected. Ladies with attenuated forms need not have their
garments fitted so closely as those possessing more rotundity ; nor
are they compelled to undergo the annoyance of padding at the
shoulders (in imitation of their more favored sisters). If the meas-
ures have been taken and applied accurately, the front shoulder
stretched properly, (while basting), and the seams laid forward, a
smooth fit will be the result. If the dress is too loose on the shoul-
der, (indicated by fullness and wrinkles along the seam), the meas-

[117]

are has been taken too long up the center of the front. This may
be remedied by cutting off (at the seam) whatever is necessary, and
re-basting. If tlie front is a smooth fit, and the back tight and too
low at the neck and shoulders, the measure has been taken too short
up the center of the back. This is not easily remedied, except by
cutting a new center-piece for the back (of the requisite size and
shape). If the front (at the neck and shoulders) draws downward,
it indicates that the measures have been taken too short up the
center of front. This defect is quite serious and difficult to remedy,
and generally occurs when the form is characterized by much ro-
tundity, with long waist and sloping shoulders.

Remark. — It is an error, into which even some professionals have
fallen, to suppose that all that is required for such forms Is to allow
abundance of room across the breast, they really requiring at this
part as much goods lengthwise as crosswise, and also larger darts, to
correspond with the taper of the waist. Again, if the dress is too
full over the breast, and wrinkles slanting downward from the arm
in front to the bottom of the waist appear, it denotes that the width
is too great (the measure at this part having been taken too loose).

If, by mistake, the dress has been cut too tight across the breast^
the top of the darts may be lowered from one-half to one inch.

If the fronts are broad, and fall easily and gracefully over the
bust, bringing out the full proportions of the form, yet still display-
ing, under the arm, unsightly wrinkles (the usual cause of so much
vexation and trouble), it indicates that the darts are too small. The
only remedy is to open and enlarge them to suit the form.

N. B. — This enlarging of the darts will cause a deficiency in the
size around the waist, which may be supplied by piecing under the
arm. If the shoulder seams are too long and the arm-holes too
tight, trim out evenly all around. When the dress laps over in
front at the neck, with a tendency to wrinkle, it denotes too loose
a measure around the neck. This may be remedied by trimming off

[118]

below the neck in front and taking up a seam on the shoulder suf-
ficient to produce the desired eifect, at the same time stretching the
neck-curve in front. This not only diminishes the tendency to
wrinkle, but gives an easy and smooth fit (particularly for dresses
cut high in the neck).

For forms having thick neck and square shoulders, it is advis-
able to draft the shoulder-line (for both front and back) by slipping
the shoulder part of the Guide one inch up toward the neck-point,
and drawing the line as usual, but extending it one inch further
than the figure indicating the actual length. For example : If the
measure is 7 inches, draw the line to 8. This gives more breadth,
and less curve on the shoulder near the neck.

The above constitute the principal difficulties which the inexpe-
rienced are liable to encounter in their first efforts at practical dress-
making. In relation to the minor details but little need be said,
except in reference to the cross-dart, which is usually made in the
manner shown by diagram 31. For very corpulent ladies this dart
should be taken up much deeper than for those of smaller propor-
tions, in which case it can be cut out after being stitched. Many of
the new basques and polonaises, however, have no cross-dart, but,
instead, have a third dart, running lengthwise), commencing under-
neath the arm-curve and extending downward in the same manner
as the ordinary dart for basqne and polonaise, being placed midway
between the side- seam and the second dart.

Caution. — This dart, however, must he provided Jor when drafting
the waist, by allowing the space of three darts instead of two. For
small forms half the size of the ordinary dart will be sufficient for
this third dart. The darts below the waist seldom require any
change if drafted and basted correctly and sloped in the same angle
as shown in the. Diagrams. If the skirt at front is too full, a deeper
seam may be taken up at the second dart (below the waist) ; and if
the same defect should appear at the side-seam, it can be remedied
in the same manner.

[119]

Sleeves and Sleeve-Linings. — The outside for sleeve should
be cut exactly tlie size and shape of the lining, taking care not
to cut two pieces alike for the same arm, which may easily be done
when there is a right and wrong side to the goods. And, if there is
a figure in the design, be careful not to cut the goods wrong side up.
The upper part of the sleeve should be drafted two inches larger
than the arm-measure, and the under part one inch larger, (curving
the top and otherwise shaping the sleeve as in Diagram 12).

N. B. — The two inches at the upper part, and the one inch at tke
under part allows for seams; also for slightly "fulling" at the top,
when sewed in, and for a small plait under the arm. The upper
part of the sleeve, above the elbow, should be cut straight with the
grain of the goods, while the under part, where it joins the outside
seam, may be slightly carving. After the linings are basted to the
goods, stitch the outside seams; then open the edges and press
them, finishing the bottom with a bias piece IJ inches in depth. If
side-plaiting is to be used for trimming sleeves, it should be re-
membered that one-half must be reversed, otherwise the plaits will
lay facing the front on one sleeve, and toward the back on the other.
This rule is also applicable when trimming the neck and shoulders
with side-plaiting.

The cord, while being basted around the top of the arm, should
be held tight, but, for the under part and sides, a little looser, as this
will give an easier fit under the arm. Place the sleeve in the arm-
hole so that when sewed in it will be full at the top, without gath-
ers, the sides being quite plain. If the sleeve is too large for the
armhole. a plait should be laid directly underneath, folding it
over toward the back.

Remark. — When dresses are worn short on the shoulders sleeves
should be cut longer and more rounding at the top (making the arm-
hole larger to correspond). Sleeves should always be cut IJ or 2
inches larger than the armholes (besides the allowance for seams),
for, if too tight, they will present a strained or wrinkled appear-

[120]

ance when sewed in, besides being exceedingly uncomfortable.
Trimming out the armhole should generally be done underneath, as
an^inch (more or less) at this part will produce no injurious effect;
but when the dress is too large across the breast, and too long on
the shoulders, trimming may be done all around sufficient to make
the armhole the proper size.

How TO Deaft Peincess Deess. — (See condensed illustration.
Diagram 50). This garment, unlike its predecessors the basque and
polonaise, forms a complete suit in itself, and is chiefly characterized
by gores commencing at the arm-size, or shoulder, and extending
continuously to the bottom of the skirt. The front skirt is drafted
according to the rules given for Miss' Polonaise, Diagrams 42
and 43.

TJie Bach of Princess Dress may be modeled after any of the
prevailing designs for polonaise, by observing the rules governing
the same.

How TO Deaft a Double-Bee asted Polonaise. — (Tight-fit-
ting). In drafting this style of garment ladies frequently experience
much difficulty by not knowing how to dispose of the darts. Before
commencing to draft the front it is important to have the Dress-
Guide placed in proper position on the goods ; viz., 2| or 3 inches
from the edge (to allow for the double-breast), as shown in Diagram
46. In other respects, the waist is drafted and the darts formed in
the same manner as for basque, except the second dart, which com-
mences directly under the arm-curve, 1 inch distant from the lower
breast-dot, and extends to the bottom of the skirt in the same slope
or angle as the first dart. The skirt of this style of polonaise is
drafted by the same rule as polonaise in Diagram 36. To produce
an artistic effect at the center of the front, the closing edges should
be deeply curved.

[121]

How TO Deaft Ladies^ Polonaise, Open at the Back — First
draft the waist by the rule for waist closed at front, Diagram 15;
and, next, the darts and side-form, as shown by Diagram 50. The
skirt is drafted by the rules given for miss^ polonaise, Diagrams 42
and 43, using the same slope for gores, and making the length of
the skirt as follows : Center of front and next front, 36 inches, and
the length at the side, 35 inches. The dart is cut out and the side-
form separated and placed upon the goods for the skirt to be attached,
in the same manner as in Diagrams 42 and 43.

Remarks. — When plaits or gathers are desired at the side-seam,
an addition of from 6 to 10 inches should be made for this purpose.
If a seam is preferred at the center of front, sufficient allowance for
the same should be made when commencing to draft. The back
may be drafted open at the center by the rules given under Dia-
grams 44 and 45, allowing 4 or 5 inches for the box-plait, instead of
3, and making the length of the skirt at the side 46 inches ; next back,
47 inches ; and center of back, 48 inches. This allows for draping.

How to Draft Lady's Polonaise with Basque-Back. — The

fronts can be drafted from any design selected, by observing the.
rules for slope of gores, length of skirt, etc. The back is composed
of a basque, with skirt attached to a band underneath, which may
consist either of two straight widths or one straight and two small
gored widths, the bias edges of which should unite at the seams
next the back, the bottom of the skirt being shaped in the usual
manner for back of polonaise.

Polonaise with Basque-Front. — Draft the front in any style
desired, according to the rule for front of basque, and the skirt sepa-
rately, by the rule for front and side of overskirt, observing the fol-
lowing precautions; viz., when the front of one garment is to be
connected with the back of another, special reference must be had
to the figure regulating the slope of the gore, as by this is deter-
mined the width of the skirt at the bottom.

[122J

Water-Proof Gloalcs. — These can be drafted by the rule for lady's
sacque-wrapper, or the front of the wrapper and the back of lady's
polonaise may be combined by adding sufficient fullness (when draft-
ing), to make a loose waist, and making the skirt the required length.
Another way is to draft the front and back by the rule given for
miss' polonaise. This, when finished, will be in the gabricllc style.
It should be remembered that additional fullness across the breast,
back, and around the waist must be allowed for all outside gar-
ments ; and in drafting the waist of any garment, allowance must
be made for each additional scam. The circular cape usually worn
with the water-proof cloak is drafted by the rule given for " circu-
lar," and may be increased in size by adding to the length when draw-
ing the line for the circle, the neck and shoulders being the same.
The hood is simply a matter of convenience or taste ; and if a collar
is preferred, it may be drafted by Diagram 13.

How to regulate the size of the darts for irregular forms — Draft the
waist for the front in the usual manner, except the line for length of
waist, which should be drawn straight down from the arm-point to
the bottom of the waist. If the form is irregular, the dot (denoting
the usual addition for the second dart) will not be on the line. If
the breast is very large, and the waist small, the dot will appear
inside the length-of- waist line; but if the breast is very small, and
the waist large, it will appear outside of the line. To determine
the size of the dart required, measure across from the dot regulating
the size around the waist to the line for the length of waist. This
space should be divided into two darts and drafted in the usual
manner. For example : If the measure across the breast should be
21 inches, and the waist-measure 23 inches, the addition for the
darts will be about b} inches ; this, divided, will make the width of
each dart 2| inches (see measures printed on upper edge of dart-
rule for spacing oif the darts).

[123]

How TO Enlarge from Designs in the Fashion-Books. —

First: Select the figure to be enlarged. If represented in full length,
place the end of the tape-line at the bottom of tJie waist in front, and
measure the entire length of the skirt ; for example, 5 inches. Second:
Ascertain the length of the skirt to be drafted ; for instance, 40
inches. Third: Divide the number 40 by 5 which gives 8. This
last number indicates the relative proportion existing between the
pattern to be drafted and its representative in the fashion-plate, and
should be used as a multiplier in finding the size of the pattern de-
sired ; for example, the length of overskirt (on the plate) is 4
inches, this, multiplied by 8, gives 32 inches, its full size when en-
larged.

Again, the skirt of a basque (at the back) measures IJ inches in
length, this, multiplied by 8, gives 12 inches (the full length). If
a ruffle on the figure measures half-an-ipch, multiply this by 8,
which gives 4 inches (the actual depth).

N. B. — If the garment selected on the plate is not given in full
length, but consists only of a portion of the same, first find the
length up the center of the front waist or back, and next ascertain the
measure or size of the corresponding part of the garment to be drafted.
For example : If the length of the waist (on the plate) measures 2
inches, and the length of the waist to be drafted measures 14 inches,
then divide the 14 by 2, which gives 7, this number being used as
a multiplier in finding the size desired in the same manner as de-
scribed in the previous example. It is advisable, however, for be-
ginners to confine their first efforts in enlarging from the fashion-
plates to the use of whole numbers, unless versed in fractions.

[124]

PART FOURTH.

VOCABULARY.

SELECTED WORDS AND TERMS

USED IN CONNECTION WITH

SILK AND OTHER DRESS GOODS.

Gros-Grain — (Fr. gro ; thick, heavy). A coarse, corded silk. The first name
given to a heavy silk which shows a distinct grain running across the width of the
goods.

Ponlt dc SOie— (Fr. pool de swah). A lustrous plain silk.

Glace — (Fr. glasse). A very glossy thin silk.

Taffeta — (Fr). A fine quality of plain silk, with dressing, and very glossy.

Fonlard— Fr. foo-lard). Eaw, or unfinished silk ; thin and without gloss.

Lustrine — (Fr). A trimming silk ; generally black, and very shining.

Marcelaine— (Fr). A thin lining silk.

Florence — (Fr). A very soft, thin lining silk of inferior width and quality.

Crepe-Silk — (Fr. crape). A silk woven like crape.

Tnrquoise — (Fr. koiz). A silk woven like velours ; first manufactured in
Turkey.

Veloui'S— (Fr). A heavy silk mixture with the cord thrown up on the right
Bide ; resemhling uncut velvet.

[125]

Lonsine — (Fr). A silk woven loosely in basket or other patterns ; generally in
stripes or other designs.

Cachemire — (Fr. Cash-mere). A soft, fine-finished silk, and designates the dif-
ference between the ordinary hard twisted silks and the newer makes, which are
soft and pliable.

N. B. — The terms " Gros de Rhine," " Gros de Naples," and others, are trade-
marks used to designate the grades or places of manufacture. The above consti-
tute the names of the principal brands in general use.

WOOLEN AND MIXED FABRICS.

Australian Crape — A cotton and wool mixture used for mourning purposes.

Grenadine — (Fr). A material made with an open mesh of twisted threads of
cotton, wool or silk, or mixed ; first imported from Grenada.

Florentine — (Fr). A kind of goods made with an open mesh, not so thin as
grenadine, nor so open ; generally silk-warp and wool filling.

Byzantine — A silk-and-wool fabric, heavier than florentine ; used principally
for mourning purposes.

Bombazine— (Fr). A thick twilled silk-and-wool fabric; used for mourning
There are two kinds, the French and English, the former being very fine and light
weight, and the latter more durable.

Henrietta Cloth — A very heavy twilled woolen goods.

Drap-d-ete— (Fr. dra-d-ta). Summer cloth, twUled like cashmere; all-wool.

Empress Cloth — An all-wool material.

Damask — A kind of thick silk ; originally made at Damascus.

Damassce— (Fr). A silk manufactured in Flanders; woven in flowers and
figures.

Brocade — (Fr). A silk embossed in figures.

Matellasse— (Fr). A silk woven in imitation of quilting.

Cabeca or Cabesse— (Ca-be-sa). The finest kind of India silk woven with a
thick, heavy cord across the goods.

Biarritz — (Fr. bearreets). A heavy all-wool corded goods.

Tamise— (Tamese). A plain all-wool goods, similar to all-wool delaines, but
heavier.

Merino— (Fr. mereno). An all-wool twilled goods ; first manufactured from the
wool of the merino sheep in Italy.

Camel's-Hair Cloth— A coarse fibrous woolen goods ; originally made from
camel's hair.

Alpaca— (Derived from paca, the Peruvian llama). A wool-and-cotton mixture.

Brilliantine— This represents a certain brand of alpaca, as also the beaver

brand, etc.

Challie— (Fr. shally). Goods made from goat's hair.

Faille— (Fr. fal-ye). Goods like a fishing-net in texture.

Irish Poplin— A silk-and-wool material ; first manufactured on the linen looms
of Ireland.

Pongee— An inferior mixed fabric of silk and wool ; first made in India.

Balzarine— An open mesh silk-and-wool fabric; first made by a Belgravian
weaver, and by him imported into France.

Debege— (Fr. debazhe). A kind of woolen mixed goods.

Japanese Silk— A silk-and-cotton fabric; first made in Japan.

[126]

Li-man-sine — (Iji-mo-sin). A rough, shaggy sort of dress-goods.

Hemane — A kind of grenadine.

Mar-seil-les — (Fr. marsalyaz). A heavy cotton-corded fabric; first made at
Marseilles, in France.

Pi-qne — (Fr. pe-ka). A cotton goods resembling marseilles; so named from
malice, it being an American production.

Vel-vet — (Fr. from vellus; shaggy). A cloth of silk or cotton, or mixed; hav-
ing a pile or shag of thread on top.

Vel-ve-tine— Cotton velvet.

Percale — (Fr. percal). A cambric muslin

Mohair — The long silky wool of the Angola goat, from Asia; also, a fabric made
from this material.

Jaconet — (Fr). A thin cotton fabric.

Giilgham — a cotton cloth, the threads of which are colored before weaving.

Flannel — (Fr. flannele). From moleton ; a swan's skin ; woolen stuff.

Vi-gOg'ne — Goods made from the wool of the vigon.

COLORS AND SHADES IN DRESS GOODS.

Azaline — (Fr. azh-u-line). From azure-blue, sky-blue.

Acier — (Fr. a-sie). Steel.

Anemone — (Fr. a-nem-o-ne). An inky-purple.

Aurore — (Fr au-ro-ra). A pinkish shade of lilac.

Bouteille— (Fr. beu-te-i). Bottle; bottle-green.

Ble— (Fr). Wheat-color

Bleu-de-Roi— (Fr). Eoyal-blue.

Argent — Silver-gray.

Creme — The color of cream.

Caoutclioac — (Fr. koo-chook). The color of indiarubber.

Cassises — (Kash-i-us). A deep purple.

Cep — (Fr. sej. Vine-color.

CMacMlla — A mottled-gray.

Cascade — A silvery -green.

Cristal— Almost white.

Ceil -Glace — (Fr. gla-se). Frozen-sky . a very pale shade of blue.

Chansseur — (Fr. sha-seur). Hunters-green.

Chataigne — ^r. sha-te-gn). Chestnut shade.

Corbeau— (Fr. cor-bo). Tlie color of the plumage of the crow ; a greenish-black.

Carmelite — A reddish-brown.

Cardinal — (E.ed). A shade j)eculiar to a cardinal's robe.

Ecmme — (Fr. c-cume). Sea-foam; shade of sea-foam.

Eufer— (Fr. an-fcr). A flame-red.

Cliambertin— (Fr). A wine-red.

Caroubier — (Fr. ka-ro-bie). Like the foilagc of the carob tree.

Feuille— (Fr. fcu-il). Leaf-brown.

Gris-Perle— (Fr. gre-pcr-le). Pearl-gray.

Cnir — (Fr. kwecr). Leather ; understood hy many persons to mean queer.

Sepia— (Fr). Black.

Mazarine— (Fr.) From Citrdlnul Mazarine, 1602; a bright-blue.

[127]

Marron — A dark chestnut-color.
Manre— Like the mallow lilac.
Fil-leal — Color of ripened limes.
Vert— Green.

THE PRINCIPAL LACES IN GENERAL USE,
BLACK,

Chantilly — (Fr, shan-til-lee). A very fine hand-made lace; often misnamed
thread.

India Lace — A fine lace in imitation of chantilly ; made by machinery

Bmssels Lace — A heavy, coarse quality of lace; hand-made; first made at
Brussels.

Guipure — (Fr, ge-pur). An imitation of antique lace ; less expensive and very
durable.

Prussia Lace — A black lace resembling Brussels; but made by machinery, and
less expensive.

Llama Lace — A lace made from the wool of the Peruvian llama.

Yak — A coarse kind of lace, made from yak wool.

WHITE.

Point- Applique — (Ap-pleek). An expensive white lace, every pattern of "which
is a transfer.

Point Lace — One of the finest and most expensive kinds ; hand-made.

Cluny— A hand-made lace resembling tatting.

Tttechlin — A beautiful imitation lace ; so called because first made at Mechlin,
Belgium ; now made at Malines and Antwerp.

Honiton — A white lace with open mesh and peculiar figures.

Smyrna — A fine linen lace ; much used for trimming underclothing.

Italian Lace — A lace made by machinery, in Italy ; an imitation of the hand-
made.

Valenciennes — A rich white lace made at Valenciennes, in France ; it has a mesh
of six sides formed of two threads partly twisted, the pattern of which is within
the mesh.

Ecru — Any lace made from raw material unbleached.

CoIl)erteen — A lace resembling network; manufactured by Mens. Colbert, a
I"renchman of some note.

NAMES AND TERMS APPLIED TO DRESS.

Antique— (An teek). Old ; old style.
Agraffe— (A-graf). A clasp.

Aiguilette — (A-gll-let). An ornament for the shoulder.

A la Mode — (Al-a-mode). After the fashion ; according to the prevailing mode.
Astraclian — (As-tra-kan). A kind of fur made from premature lambs, which
are taken before birth.
Alternating- Following each other by turns.

[128]

Bandeau— (Ban-do). An ornament for the head.

Basque— (Bask). Part of a lady's dress; so called because It originated in

Biscay.

Bazar— Authority in fashion.

Bandalette— (Ban-da-let). A band for the hair.

Blonde— Fr. from blon). Fair; light.

Bias -Bands— Strips of goods cut diagonally as a finish for garments.

Bijouterrie— (Fr. be-zhoo-try). Jewelry; trinkets.

Bournous— (Fr. bour-nooz). A sort of cloak -worn by the Moors.

Boudoir— (Fr. boo-dwor). A lady's private room.

Bulletin— An expose or edict of fashion ; report

Bulgare — Plait ; tripple plait.

Boulevard— (Fr. boo-le-var). A kind of skirt made from felt , so called from
its being considered impenetrable.

Bretelles— Straps for the shoulder.

Beau-Monde— (Fr. bo-mond). The fashionable world.

Bouffant— (Fr. bou-fan). Puffing.

Plait or Pleat— Goods doubled or folded to form trimming.

Box-Plait— A plait whose sides are reversed.

Double Box-Plait— A box-plait whose sides are folded double.

Calico— Printed muslin ; so called from its being imported first from Calicut,

East Indies.

Cheffanier— (Fr. shif-fon-eer. A lady's work-table.

Chatelain— ^Fr. shatalin). An ornamented side-pocket.

Camlet— A cloak originally made from camel's hair.

Camis — A short cloak.

Cascade— A word used to denote trimming as falling in undulating waves.

Camail— A short cloak, usually made of fur.

Crinoline— (A word derived from crino, which means hair). Under-skirts first
made from hair.

Casacque— (Fr. ca-sak). A great coat.

Cuirasse— (Fr. que-ras). A coat of mail ; in dress meaning a kind of basque
whose peculiarity consists in fitting to the form closely.

Chale— (Shal). A shawl. , . , ,

Centimeter— (Fr). A hundredth-part-of-meter ; being about one-third-of-an-

inch.
Connnoisseur— (Fr. kon-nis-sur). A person skilled in anythmg.

Corsage— A dress-body.

Crash— (From crassus). A coarse unbleached linen.

Cable -Cord— A heavy cord.

Caftan — A Persian vest.

Cheneille— (She-nil). A caterpillar; a rough, shaggy cord.

Countour— The line that bounds or terminates the outline of the general form.

Costume- (From custom). Any established manner or mode of dress.

Costumer- One who deals in dress.

Court-Train— So called because ladies wore them at court receptions, being held

up by a bearer.

Cruciform— Cross-shaped, or the shape of a cross.
Coiffure— (Fr. cof-fure). The bead.

[129]

Dentile— (Ft. den-t-le). Notched.

Demi — Half; demi-train, half-a-traln.

Debutant— (Fr. de-bu-tong). First appearance.

Decollette — Bare.

De Mod en Welt — The world of fashion.

Demi Saison — Half-season ; or spring and fall.

Diagonal — Crosswise.

Diaphanons— Thin ; transparent.

Do-le-man— A Turkish garment ; a kind of cloak.

Ecarlate — Scarlet.

Embonpoint — (Fr. ong-bong-pwong). Eotundity of figure.
Elite — (Fr. a-leet). Choice, as the elite of society.
Elongated — Lengthened.

Fabric — (From facere ; to make). Texture.

Fraize — A ruff; a trimming for the neck.

Festoon — A garland or wreath hanging in depending curves; trimming ar-
ranged in this way.

Frayed Ruffles — Goods cut either bias or straight and fringed out on the edges.

Fan -Shaped Plaits — Plaits disposed upon the garments in such a manner as to
produce a fan-like appearance when done.

Frogs — Ornamental buttons used for fastening cloaks in front.

French-Back — The back of a dress cut without separate side-forms.

Fishu — (Fr. fish-u). A fanciful-shaped garment for the neck and shoulders.

Garniture— That which embellishes.

Galloon — (Fr. from galon ; showy). Originally a braid interwoven with threads
of gold ; a trimming binding-braid.

Grlseille — Fr. griz-zle). A gray woolen cloth; a mixture of white and black

Gaze — Gauze-like.

Gabrielle^A costume first made by order of an Italian primo-donna; origi-
nally trimmed with quantities of gold cord running down the seams ; a garment
with the waist and skirt together.

Graduated Trimming— Trimming graduated in width.

Harmonize — To blend colors so that the effect will be pleasing to the eye.

Habilament— Dress ; attire; clothing.

Hauteur— (Fr. ho-tur). Height.

Hercules Braid — A strong, heavy braid ; so called from Hercules.

Hamburg Embroidery — Embroidery woven in figures by machinery ; first mado
in Hamburg

Polonaise — (Fr. from polonais). A kind of dress worn by ladies, which origi-
nated in Poland.

Rerers — (Fr. re-veres). Reversed ; laid over.

Insertion or Inserting' — Narrow embroidered strips of muslin or lace.

Jupe — An overskirt.

Jupon — An underskirt, or petticoat.

Jabot — A trimming of lace and ribbon for the neck.

[130]

Kilt- Plaits — Large plaits laid one way on the goods.

Knife-Plaits — Very fine plaits made in the same manner as kilt-plaits.

Lisse — (Fr. lese). A smooth, glossy goods; used for ruching.
Lustrine— (Fr. from lucre). Shining.

Metre — A French measure, of about three feet in length.

Modiste — (Fr. Modista). A dealer and producer of fashions : dress-maker.

IVail-Heads — A very small button used in trimming

Plisse— (Fr. plis-se) ; Fold ; plaits.

Toumnre — A bustle used for expanding the clothing.

Titan Braid — (From titan ; strength). A heavy woolen braid ; used for trimming

Vandykes— Indentations or scallopB.
Vetement — A garment.

LIBRARY OF CONGRESS

iniiiiiiiiiiiiiiiii

0 013 973 024 0

Internet Archive Audio

Featured

Top

Images

Featured

Top

Software

Featured

Top

Texts

Featured

Top

Video

Featured

Top

Mobile Apps

Browser Extensions

Archive-It Subscription

Save Page Now

Full text of "The science and geometry of dress"

See other formats